Article

A. AHMADI, and F. EL BOUANANI, and HUSSAIN BENAZZA, and Y. BENGHABRIT ., (2012) Reduced Complexity Iterative Decodig of 3D-Product Block Codes Based on Genetic Algorithms. Journal of Electrical and Computer Engineering. Volume2012, article ID 609650, 8 pages..

A. ARBAOUI, and M. ASBIK, (2010) Constraints based decision support for site-specific preliminary design of wind turbines. Energy and Power Engineering, Vol. 2, N° 3. PP.161-170, 2010.

A. ARBAOUI, and M. ASBIK, and LOUDIYI.K, and MABROUK BENHAMOU, (2010) Added value of power control in improving the integration of wind turbines in weak grid conditions. Energy and Power Engineering, 2, 230-237, 2010.

ALI CHAABA, (2010) Plastic Collapse Assessment of Thick Vessels Under Internal Pressure According to Various Hardening Rules. Journal of Pressure Vessel Technology,2010, vol. 132, issue 5,.

ALI CHAABA, (2010) Plastic collapse in presence of non-linear kinematic hardening by the bipotential and the sequential limit analysis approches. Mechanics Research Communications (ELSEVIER), Volume 37, Issue 5, July 2010, Pages 484–488.

ALI CHAABA, (2013) Reliability assessment by analytical calculation of the plastic collapse load of thin pressure vessels with strain hardening and large deformation. Thin-Walled Structures 62(2013) 46–52..

ALI CHAABA, and BOUSSHINE LAHBIB, and DE SAXCE GERY, (2010) Kinematic Limit Analysis of Nonassociated Perfectly Plastic Material by the Bipotential Approach and Finite Element Method. Journal of Applied Mechanics, Transactions of the ASME, Volume 77, Issue 3 , 2010.

ARHCHOUI, and EL AMRAOUI, and MEZZANE, and I. LUK'YANCHUK, (2011) Phase diagrams of ferroelectric thin film with diluted surface. Superlattices and Microstructurers,49 (2011), PP. 307–313..

B. RZINE, and N. MOUJIBI, and A. SAKA, and M. RADOUANI, and B. EL FAHIME, (2010) Subsystem interaction of mechatronic system with clearance. International Journal of Systems Control, ISSN: 1737-927X. Volume 1, Issue no 3. Pages 122 à 130, May 2010..

H. ZAGHAR, and M. SALLAOU, and A. CHAABA, (2013) Support at the choice of solutions to the phase of preliminary design based on reliability analysis « Application to geared-drive and direct-drive wind turbines ». International Journal of Mechanical Engineering and Technology, Volume 4, Issue 1, Jan-Feb (2013), pp. 150-162..

I. AKHRIF, and L. MESRAR, and A. EL JAY, and R. JABRANE, (2014) Proposition of Corrosion Expertise Method for Water Pumping Stations Application to the Case of Northern Station of Fez City Moroco. International Journal of Engineering and Technology, Vol. 5. No. 6. Dec2013-Jan2014, ISSN : 0975-4024.

I. MOUALLIF I, and A. LATRACH, and M. CHERGUI, and A. BENALI, and M. ELGHORBA, and Z. MOUALLIF, and N. HANGOUËT, and J.P. BARBE, (2013) Degradation of dynamic mechanical properties of glass fiber reinforced polyester composites pipes after immersion in various temperatures. Journal of Composite Materials. Vol. 48(24) 3025-3034(2013)..

IRHIRANE E. H, and M. ABOUSSALEH, and ECHAABI J., and A. SAOUAB, and M. HATTABI, and O.M. BENSALEH, (2010) Modelling and simulation of the failure and stiffness degradation of a graphite epoxy in three point bending test. Journal of Engineering Materials and Technology. vol. 132, N°3, 2010.

M. RADOUANI, and A. BOUAYAD, and A. SAKA, and B. EL FAHIME, and B. RZINE, and N. MOUJIBI, (2010) Modeling Simulation and Analysis of Mechatronic Systems by Bond Graphs and Monte Carlo Simulations. Journal of Modelling and Simulation of Systems , ISSN 1737-9377, Vol 1 issue 4 PP. 204-212, 2010.

M. RADOUANI, and A. NAAMANE, and A. SAKA, (2011) Modeling of aircraft braking system : component orientd approach. International Journal of Research an Reviews in Machatronic Design and Simulation, Vol 1, N° 3, 2011, PP. 43-48, ISSN 2046-6234.

M. RADOUANI, and B. EL FAHIME, and N. MOUJIBI, and B. RZINE, and K. JABALLI, (2011) 3D Geometry and tolerance modeling for phsical simulation. International Journal of Research an Reviews in Machatronic Design and Simulation ISSN 2046-6234 Vol 1 N° 1, PP. 18-22, 2011 ISSN 2046-6234.

M. RADOUANI, and B. EL FAHIME, and N. MOUJIBI, and B. RZINE, and K. JABALLI, and J. LOUATI, and MUSTAPHA HADDAD, (2011) Computer-Aided dimensioning of multi-physics system in a design strategy : application to slider-crak mechnism. International Journal of Research an Reviews in Machatronic Design and Simulation ISSN 2046-6234 Vol 1 N° 1, 2011, PP. 1-6.

OUSSOUADDI, O. and DARIDON, L. and AHZI, S. and CHRYSOCHOOS, A. (2011) Influence of Dissipated Energy on Shear Band Spacing in HY100 Steel. Journal of Engineering Materials and Technology, 133. 021002-1-021002-6. ISSN 0094-4289

S. BOUHOU, and I. ESSAOUDI, and A. AINANE, and M. SABER, and J. J. DE MIGUEL, and M. KEROUAD, (2012) Hysteresis loops and phase diagrams of the spin-1 Ising model in a transverse crystal field. Chinese Physics Letters Vol. 29, N°1, 016101-1 (2012).