Up a level |

- SCIENTIFIC PRODUCTION (362)
**Engineering**(362)

Group by: Creators | Item Type

Number of items at this level: **362**.

Abdelkafi, Z. and Abdelmoula, N. and Khemakhem, H. and Von Der Mühll, R. and Bih, L.
(2007)
*Effects of the substitution of titanium by iron and niobium on the structure and dielectric properties in BaTi1-x(Fe0.5Nb0.5)xO3 solid solution.*
Journal of Alloys and Compounds, 427 (1-2).
pp. 260-266.

Abdellaoui, A. and Bath, A. and Bouchikhi, B. and Baehr, O.
(1997)
*Structure and optical properties of boron nitride thin films prepared by PECVD.*
Materials Science and Engineering B, 47 (3).
pp. 257-262.

Abdellaoui Alaoui, E.A. and Agoujil, S. and Hajar, M. and Qaraai, Y.
(2017)
*DTN network: Optimal cluster head in DTN routing hierarchical topology (DRHT).*
Lecture Notes in Electrical Engineering, 397.
pp. 109-122.

Abdelmoumen, K. and Najmeddine, M. and Ben-Azza, H.
(2011)
*Pontrjagin duality and codes over finite commutative rings.*
World Academy of Science, Engineering and Technology, 80.
pp. 999-1003.

Aicha Youssef, A. and Mohamed Bouzzine, S. and Mohyi Eddine Fahim, Z. and Sıdır, İ. and Hamidi, M. and Bouachrine, M.
(2019)
*Designing Donor-Acceptor thienopyrazine derivatives for more efficient organic photovoltaic solar cell: A DFT study.*
Physica B: Condensed Matter, 560.
pp. 111-125.

Ait-Mlouk, A. and Kamsa, I. and Gharnati, F. and Agouti, T.
(2017)
*Intelligent transport system for road safety based data mining approach.*
International Journal of Control and Automation, 10 (8).
pp. 13-22.

Ait‐Hellal, O. and Altman, E. and Elouadghiri, D. and Erramdani, M.
(1999)
*Performance evaluation of the rate-based flow control mechanism for ABR service.*
Telecommunication Systems, 12 (2-3).
pp. 211-236.

Alami, A.E. and Harraki, I.E. and Boutoulout, A.
(2018)
*Regional Feedback Stabilization for Infinite Semilinear Systems.*
Journal of Dynamical and Control Systems, 24 (2).
pp. 343-354.

Alaoui, M. and Santos, A.
(1992)
*Poiseuille flow driven by an external force.*
Physics of Fluids A, 4 (6).
pp. 1273-1282.

Alaoui, M.E.
(2018)
*SMART Grid Evaluation Using Fuzzy Numbers and TOPSIS.*
In: UNSPECIFIED.

Ali, N.A. and Cherradi, B. and El Abbassi, A. and Bouattane, O. and Youssfi, M.
(2017)
*Modelling the behavior of the CPU and the GPU versus the clusters number variation for sequential and parallel implementations of BCFCM algorithm.*
ARPN Journal of Engineering and Applied Sciences, 12 (21).
pp. 6030-6038.

Allouache, N. and Chikh, S. and Bennacer, R. and Mers, A.A.
(2013)
*Modeling of heat and mass transfer in an adsorption solar cooling system.*
Special Topics and Reviews in Porous Media, 4 (3).
pp. 197-205.

Amari, A. and El Bari, N. and Bouchikhi, B.
(2011)
*Quality control of goat milk by a portable electronic nose based on metal oxide semiconductor sensors Contrôle qualité du lait de chèvre par un nez électronique portable basé sur des capteurs à oxydes métalliques semi-conducteurs.*
Instrumentation Mesure Metrologie, 11 (1-2).
pp. 31-49.

Amounas, F. and Kinani, E.H.E.
(2013)
*Secure encryption scheme of amazigh alphabet based ECC using finite state machine.*
In: UNSPECIFIED.

Antić-Fidančev, E. and Viana, B. and Aschehoug, P. and Bih, L. and Nadiri, A. and Taibi, M. and Aride, J.
(2006)
*Optical study of Eu3+ ion embedded in (1-x)Na2WO 4-xP2O5 glasses highlighting a temperature effect on its local environment.*
Materials Science Forum, 518.
pp. 447-454.

Arbaoui, J. and Moustabchir, H. and Vigué, J.R. and Royer, F.-X.
(2016)
*The efects of various nanoparticles on the thermal and mechanical properties of an epoxy resin.*
Materials Research Innovations, 20 (2).
pp. 145-150.

Askour, R. and Bououlid, B.
(2010)
*Experimental assessment of trapezoidal commutation and FOC performances of 3-phase permanent magnet brushless motor.*
In: UNSPECIFIED.

Ayachi, S. and Alimi, K. and Bouachrine, M. and Hamidi, M. and Mevellec, J.Y. and Lère-Porte, J.P.
(2006)
*Spectroscopic investigations of copolymers incorporating various thiophene and phenylene monomers.*
Synthetic Metals, 156 (2-4).
pp. 318-326.

Ayoub, F. and Lahmer, M. and Belkasmi, M. and Bouyakhf, E.H.
(2010)
*Impact of the decoder connection schemes on iterative decoding of GPCB codes.*
World Academy of Science, Engineering and Technology, 37.
pp. 876-882.

Azouggagh, M. and Nebgui, A. and Oussouaddi, O. and Haterbouch, M. and Zeghloul, A.
(2017)
*Study of fatigue crack propagation in the austenitic stainless steel 304L.*
International Journal of Mechanical and Mechatronics Engineering, 17 (5).
pp. 114-120.

Azrour, M. and Farhaoui, Y. and Ouanan, M.
(2018)
*Cryptanalysis of Farash et al.’s SIP authentication protocol.*
International Journal of Dynamical Systems and Differential Equations, 8 (1-2).
pp. 77-94.

Azzaoui, H. and Mansouri, I. and Elkihel, B.
(2019)
*Methylcyclohexane continuous distillation column fault detection using stationary wavelet transform and K-means.*
Lecture Notes in Electrical Engineering, 519.
pp. 399-411.

Baccar, Z.M. and Hidouri, S. and El Bari, N. and Jaffrezic-Renault, N. and Errachid, A. and Zine, N.
(2009)
*Stable immobilization of anti-beta casein antibody onto layered double hydroxides materials for biosensor applications.*
Sensor Letters, 7 (5).
pp. 647-655.

Bahsine, S. and Abarkan, M. and Maillard, A. and Eddeqaqi, N.C.
(2017)
*Temperature dependence of the electro-optic coefficient and dielectric permittivity in rhodium doped barium titanate (BaTiO3: Rh).*
Micro and Nanosystems, 9 (1).
pp. 72-77.

Bakadi, F. and Rouai, M. and Dekayir, A. and Benyassine, E.M.
(2020)
*Degradation Study of an Earthen Historical Rampart of Meknes City (Morocco) Using Ultrasonic Non-destructive Testing.*
Lecture Notes in Civil Engineering, 62.
pp. 1267-1273.

Bakhti, M. and Bououlid, B.I.
(2016)
*Highly non linear rigid flexible manipulator state estimation using the Extended and the Unscented Kalman filters.*
In: UNSPECIFIED.

Bakhti, M. and Idrissi, B.B.
(2011)
*Active vibration reducing of a one-link manipulator using the state feedback decoupling and the first order sliding mode control.*
In: UNSPECIFIED.

Bakhti, M. and Idrissi, B.B.
(2016)
*Highly nonlinear flexible manipulator state estimation using the extended and the unscented Kalman filters.*
International Review of Automatic Control, 9 (3).
pp. 151-160.

Bakhti, M. and Idrissi, B.B.
(2016)
*Nonlinear one - link flexible manipulator state estimation using the extended Kalman Filter.*
International Journal of Control and Automation, 9 (11).
pp. 315-326.

Baliti, J. and Hssikou, M. and Alaoui, M.
(2017)
*The 13-moments method for heat transfer in gas microflows.*
Australian Journal of Mechanical Engineering.
pp. 1-14.

Ballouki, I. and Douimi, M. and Ouzizi, L.
(2018)
*Ecodesign integration in the joint design of product and its supply chain: Agent-based model.*
In: UNSPECIFIED.

Barghouti, M.E. and Akjouj, A. and Mir, A.
(2018)
*Effect of MoS2 layer on the LSPR in periodic nanostructures.*
Optik, 171.
pp. 237-246.

Bejjit, L. and Haddad, M.
(2002)
*EPR in superconducting and nonsuperconducting Gd0.02Y0.98Ba2Cu3 O7-δ. Resolved and unresolved fine structure of Gd3+.*
Journal of Materials Science: Materials in Electronics, 13 (7).
pp. 399-402.

Bekhta, A. and Hsissou, R. and Berradi, M. and El Bouchti, M. and Elharfi, A.
(2019)
*Viscosimetric and rheological properties of epoxy resin TGEUBA and their composite (TGEUBA/MDA/TGEMDA+TSP).*
Results in Engineering, 4.

Benaissa, H. and Benkhira, E.-H. and Fakhar, R. and Hachlaf, A.
(2019)
*Quasistatic frictional thermo-piezoelectric contact problem.*
Mathematical Methods in the Applied Sciences, 42 (4).
pp. 1292-1311.

Bendada, E. and Raïs, K.
(1998)
*Analysis of hot-carrier degradation in small and large W/L n-channel transistors.*
Active and Passive Electronic Components, 21 (3).
pp. 189-198.

Bendada, E. and Raïs, K.
(1998)
*Diode physical parameters for hexfets characterization of dose effect.*
Active and Passive Electronic Components, 21 (3).
pp. 199-208.

Bendada, E. and Raïs, K. and Mialhe, P.
(1997)
*Caractérisation des dégradations de transistors MOS de puissance sous irradiations.*
Journal de Physique III, 7 (11).
pp. 2131-2143.

Bendada, E. and Raïs, K. and Mialhe, P. and Charles, J.P.
(1998)
*Surface recombination via interface defects in field effect transistors.*
Active and Passive Electronic Components, 21 (1).
pp. 61-71.

Bendali, A. and Bri, S. and Habibi, M. and Srifi, M.N. and El Fellahin, A.
(2019)
*Study and design a novel adaptive array antenna for a RFID applications.*
International Journal of Emerging Trends in Engineering Research, 7 (12).
pp. 805-811.

Benhala, B.
(2014)
*Ant colony optimization for optimal low-pass butterworth filter design.*
WSEAS Transactions on Circuits and Systems, 13.
pp. 313-318.

Benhala, B.
(2014)
*Hybridization approches of metaheuristics for optimal analog circuit design.*
International Journal of Microwave and Optical Technology, 9 (6).
pp. 421-428.

Benhala, B. and Kotti, M. and Ahaitouf, A. and Fakhfakh, M.
(2014)
*Backtracking ACO for RF-circuit design optimization.*
IGI Global, pp. 158-179.

Benkhira, E.-H. and Fakhar, R. and Mandyly, Y.
(2019)
*Numerical approximation of a frictional contact problem in elasto-plasticity based on the penalty approach.*
ZAMM Zeitschrift fur Angewandte Mathematik und Mechanik, 99 (12).

Benkirane, S. and Hssane, A.B. and Laghdir, M. and Hasnaoui, M.L. and Ouadghiri, M.D.E.
(2012)
*Performance evaluation of radio channels in wireless sensor network.*
In: UNSPECIFIED.

Bennis, G. and Karim, M. and Lagrioui, A. and Felja, M.
(2018)
*Optimization the performance of a synchronization controller for a 3-phase photovoltaic grid-connected system using the PSD algorithm.*
WSEAS Transactions on Systems and Control, 13.
pp. 193-200.

Bennis, L. and Amali, S.
(2019)
*From learning game to adaptive ubiquitous game based learning.*
International Journal of Emerging Technologies in Learning, 14 (16).
pp. 55-65.

Benriad, F. and Zbitou, J. and Bennis, H. and Benaïssa, A. and Sanchez, A.M.
(2017)
*A novel microstrip low pass filter based on ring topology.*
International Journal of Microwave and Optical Technology, 12 (1).
pp. 17-21.

Benyetho, T. and El Abdellaoui, L. and Zbitou, J. and Bennis, H. and Tribak, A. and Latrach, M.
(2017)
*A new dual band planar fractal antenna array for ISM band.*
International Journal of Microwave and Optical Technology, 12 (3).
pp. 141-148.

Benyetho, T. and Zbitou, J. and El Abdellaoui, L. and Bennis, H. and Tribak, A.
(2018)
*A new fractal multiband antenna for wireless power transmission applications.*
Active and Passive Electronic Components, 2018.

Bih, H. and Bih, L. and Manoun, M. and Lazor, P.
(2009)
*Preparation and electrical conductivity of NaF-Li2OWO3-P2O5 glasses.*
Optoelectronics and Advanced Materials, Rapid Communications, 3 (9).
pp. 959-963.

Bih, L. and El Omari, M. and Réau, J.M. and Nadiri, A. and Yacoubi, A. and Haddad, M.
(2001)
*Electrical properties of glasses in the Na2O-MoO3-P2O5 system.*
Materials Letters, 50 (5-6).
pp. 308-317.

Bih, L. and Mohdachi, S. and Nadiri, A. and Mansouri, M. and Amalhay, M. and Mykajlo, O. and Kaynt, D.
(2008)
*Some physical properties of fluorine oxide glasses belonging to the NaF-Li2O-MoO3-P2O5 system.*
Optoelectronics and Advanced Materials, Rapid Communications, 2 (5).
pp. 253-257.

Bossoufi, B. and Aroussi, H.A. and Ziani, E. and Lagrioui, A. and Derouich, A.
(2014)
*Low-speed sensorless control of DFIG generators drive for wind turbines system.*
WSEAS Transactions on Systems and Control, 9 (1).
pp. 514-525.

Bouachrine, M. and Bouzakraoui, S. and Hamidi, M. and Ayachi, S. and Alimi, K. and Lère-Porte, J.-P. and Moreau, J.
(2004)
*Synthesis and characterization of co-polymers involving various thiophene and phenylene monomers.*
Synthetic Metals, 145 (2-3).
pp. 237-243.

Bouachrine, M. and Lère-Porte, J.-P. and Moreau, J.J.E. and Sauvajo, J.-L. and Serein-Spirau, F. and Torreilles, C.
(1999)
*Oxidative polymerisation of silyl monomers: Applications and limits.*
Synthetic Metals, 101 (1-3).
pp. 15-16.

Bouazaoui, K. and Agounoun, R. and Sbai, K. and Zoubir, A. and Kadiri, I. and Rahmoune, M. and Saadani, R.
(2017)
*Experimental and numerical study of pool boiling heat transfer of liquid nitrogen LN2: Application to the brass ribbon cooling in horizontal position.*
International Journal of Mechanical and Mechatronics Engineering, 17 (2).
pp. 74-82.

Bouazaoui, K. and Dlimi, M. and Agounoun, R. and Sbai, K. and Zoubir, A. and Kadiri, I. and Rahmoune, M. and Saadani, R.
(2017)
*Nucleate pool boiling of liquid nitrogen on a brass ribbon with different positions.*
International Journal of Mechanical and Mechatronics Engineering, 17 (5).
pp. 101-108.

Bouazza, G. and Assou, M. and Souabi, S. and Chatri, E.H.
(2019)
*Modelling by the experimental design for color removal (Absorbance at 254 nm) from tannery wastewater.*
Desalination and Water Treatment, 148.
pp. 324-328.

Boudnaya, J. and Mkhida, A.
(2016)
*Comparative study of the reliability of a Moroccan Level Crossing system using belief function theory and imprecise probabilities.*
Lecture Notes in Electrical Engineering, 380.
pp. 391-399.

Boudnaya, J. and Sallak, M. and Mkhida, A.
(2015)
*Dependability analysis of level crossing systems using a fuzzy Dynamic Fault Tree approach.*
In: UNSPECIFIED.

Bougrini, M. and Tahri, K. and Haddi, Z. and Saidi, T. and El Bari, N. and Bouchikhi, B.
(2014)
*Detection of adulteration in argan oil by using an electronic nose and a voltammetric electronic tongue.*
Journal of Sensors, 2014.

Bougueraa, F.Z. and Ettaqi Said, S.
(2016)
*Development of Chitosan coating: Study of the effect of roughness on the mechanical and morphological performances.*
International Review of Mechanical Engineering, 10 (7).
pp. 537-542.

Bouhadda, M. and Abbou, F.M. and Serhani, M. and Chaatit, F. and Abid, A. and Boutoulout, A.
(2020)
*Temporal pulse broadening due to dispersion and weak turbulence in FSO communications.*
Optik, 200.

Bouhajib, A. and Nadiri, A. and Yacoubi, A. and Bros, H. and Castanet, R.
(1999)
*Calorimetric investigation of the solid compounds of the Au-Pb system.*
Journal of Alloys and Compounds, 282 (1-2).
pp. 149-152.

Bouhajib, A. and Nadiri, A. and Yacoubi, A. and Castanet, R.
(1999)
*Investigation of the short-range order in the Ca-Sb melts.*
Journal of Alloys and Compounds, 287 (1-2).
pp. 167-169.

Bouhajib, A. and Nadiri, A. and Yacoubi, A. and Castanet, R.
(1999)
*Partial enthalpies of titanium, hafnium, tantalum, tungsten and iridium in liquid tin at high dilution.*
Journal of Alloys and Compounds, 287 (1-2).
pp. 170-173.

Bouisfi, A. and Bouisfi, F. and Chaoui, M.
(2019)
*Factors affecting milk freezing point from montbeliard and Prim Holstein Cows.*
FME Transactions, 47 (1).
pp. 129-134.

Bouisfi, A. and Chaoui, M.
(2018)
*Effect of the freezing point of raw milk on the protein content and rheology of the curd, obtained by combining acid and rennet coagulation.*
FME Transactions, 46 (4).
pp. 644-650.

Bouisfi, F. and Bouisfi, A. and Ouarriche, H. and El Bouhali, M. and Chaoui, M.
(2019)
*Improving removal efficiency of sedimentation tanks using different inlet and outlet position.*
FME Transactions, 47 (4).
pp. 894-900.

Boujenab, M. and Cherkaoui, N.E.
(2017)
*3D laser imaging using new photometric Gaussian range equation and Phong model reflection.*
Optik, 140.
pp. 363-369.

Bouoidina, A. and El-Hajjaji, F. and Drissi, M. and Taleb, M. and Hammouti, B. and Chung, I.-M. and Jodeh, S. and Lgaz, H.
(2018)
*Towards a Deeper Understanding of the Anticorrosive Properties of Hydrazine Derivatives in Acid Medium: Experimental, DFT and MD Simulation Assessment.*
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 49 (10).
pp. 5180-5191.

Bousshine, L. and Chaaba, A. and De Saxce, G.
(2002)
*Plastic limit load of plane frames with frictional contact supports.*
International Journal of Mechanical Sciences, 44 (11).
pp. 2189-2216.

Boutaleb, S. and Boualoul, M. and Bouchaou, L. and Oudra, M.
(2008)
*Application of remote-sensing and surface geophysics for groundwater prospecting in a hard rock terrain, Morocco.*
CRC Press, pp. 215-227.

Boutoulout, A. and Bourray, H. and El Alaoui, F.-Z.
(2013)
*Regional boundary observability of semilinear hyperbolic systems: Sectorial approach.*
IMA Journal of Mathematical Control and Information, 32 (3).
pp. 497-513.

Boutoulout, A. and Bourray, H. and El Alaoui, F.Z.
(2012)
*Boundary flux reconstruction for semilinear parabolic systems: Hum approach.*
International Review of Automatic Control, 5 (5).
pp. 652-659.

Boutoulout, A. and Bourray, H. and El Alaoui, F.Z.
(2012)
*Regional gradient observability for distributed semilinear parabolic systems.*
Journal of Dynamical and Control Systems, 18 (2).
pp. 159-179.

Boutoulout, A. and Bourray, H. and Khazari, A.
(2013)
*Gradient observability for hyperbolic system.*
International Review of Automatic Control, 6 (3).
pp. 247-263.

Bouyanzer, A. and Hammouti, B. and Majidi, L.
(2006)
*Pennyroyal oil from Mentha pulegium as corrosion inhibitor for steel in 1 M HCl.*
Materials Letters, 60 (23).
pp. 2840-2843.

Bouyghf, H. and Benhala, B. and Raihani, A.
(2018)
*Artificial bee colony technique for a study of the influence of impact of metal thickness on the factor of quality-Q in integrated square spiral inductors.*
In: UNSPECIFIED.

Bri, S. and Zenkouar, L.
(2004)
*Numerical study of the dynamic signal in the surface channel charge coupled devices.*
In: UNSPECIFIED.

Bri, S. and Zenkouar, L. and Saadi, A. and Bellarbi, L. and Habibi, M. and Mamouni, A.
(2004)
*Measure of the temperature-depth profile by an S band radiometric receiver for biomedical applications.*
Annales des Telecommunications/Annals of Telecommunications, 59 (3-4).
pp. 467-484.

Brouri, A.
(2017)
*Frequency identification of Hammerstein-Wiener systems with backlash input nonlinearity.*
WSEAS Transactions on Systems and Control, 12.
pp. 82-94.

Brouri, A. and Amdouri, O. and Chaoui, F.Z. and Giri, F.
(2014)
*Frequency identification of hammerstein-wiener systems with piecewise affine input nonlinearity.*
In: UNSPECIFIED.

Brouri, A. and Giri, F. and Ikhouane, F. and Chaoui, F.Z. and Amdouri, O.
(2014)
*Identification of hammerstein-wiener systems with backlash input nonlinearity bordered by straight lines.*
In: UNSPECIFIED.

Brouri, A. and Kadi, L.
(2019)
*Identification of nonlinear systems∗.*
In: UNSPECIFIED.

Brouri, A. and Rabyi, T. and Ouannou, A.
(2019)
*Identification of nonlinear systems having hard function.*
Advances in Systems Science and Applications, 19 (1).
pp. 61-74.

Chaaba, A.
(2013)
*Reliability assessment by analytical calculation of the plastic collapse load of thin pressure vessels with strain hardening and large deformation.*
Thin-Walled Structures, 62.
pp. 46-52.

Chaaba, A. and Bousshine, L.
(2009)
*Plastic collapse in the presence of isotropic hardening Etats limites plastiques en présence de l'écrouissage isotrope.*
European Journal of Computational Mechanics, 18 (5-6).
pp. 525-545.

Chaaba, A. and Bousshine, L. and Aboussaleh, M. and El Boudaia, H.
(2011)
*Plastic limit analysis with non linear kinematic strain hardening for metalworking processes applications.*
Journal of Mechanical Science and Technology, 25 (11).
pp. 2859-2870.

Chaaba, A. and Bousshine, L. and De Saxce, G.
(2003)
*Kinematic limit analysis modelling by a regularization approach and finite element method.*
International Journal for Numerical Methods in Engineering, 57 (13).
pp. 1899-1922.

Chaaba, A. and Bousshine, L. and de Saxce, G.
(2010)
*Kinematic limit analysis of nonassociated perfectly plastic material by the bipotential approach and finite element method.*
Journal of Applied Mechanics, Transactions ASME, 77 (3).
pp. 1-11.

Chaayra, T. and El Bouanani, F. and Ben-azza, H.
(2019)
*Asymptotic capacity analysis under different adaptive transmission for TAS/MRC MIMO scheme subject to Weibull fading channels.*
Physical Communication, 36.

Chafai, A. and Dujardin, F. and Essaoudi, I. and Ainane, A. and Ahuja, R.
(2017)
*Shallow donor inside core/shell spherical nanodot: Effect of nanostructure size and dielectric environment on energy spectrum.*
Superlattices and Microstructures, 111.
pp. 976-982.

Chaoui, M. and Feuillebois, F.
(2003)
*Creeping flow around a sphere in a shear flow close to a wall.*
Quarterly Journal of Mechanics and Applied Mathematics, 56 (3).
pp. 381-410.

Chaoui, M. and Feuillebois, F.
(2012)
*Erratum: Creeping flowaround a sphere in a shear flow close to Awall (Quarterly Journal of Mechanics and Applied Mathematics (2003) 56 (381-410)).*
Quarterly Journal of Mechanics and Applied Mathematics, 65 (4).
p. 581.

Charhouni, N. and Sallaou, M. and Mansouri, K.
(2018)
*Design analysis of critical concepts influence wind farm production and efficiency.*
International Journal of Engineering Research in Africa, 40.
pp. 136-150.

Charhouni, N. and Sallaou, M. and Mansouri, K.
(2018)
*Investigation of wake interactions effect on wind farm efficiency.*
In: UNSPECIFIED.

Chatibi, Y. and El Kinani, E.H. and Ouhadan, A.
(2019)
*On the discrete symmetry analysis of some classical and fractional differential equations.*
Mathematical Methods in the Applied Sciences.

Chawki, Y. and El Asnaoui, K. and Mohammed, O. and Brahim, A.
(2018)
*Content frequency and shape features based on CBIR: Application to colour images.*
International Journal of Dynamical Systems and Differential Equations, 8 (1-2).
pp. 123-135.

Chaynane, R. and Asbik, M. and Boushaba, H. and Zeghmati, B. and Khmou, A.
(2004)
*Study of laminar film condensation on the wall of an inclined porous plate Étude de la condensation en film laminaire d'une vapeur pure et saturée sur la paroi poreuse d'une plaque inclinée.*
Mecanique et Industries, 5 (4).
pp. 381-391.

Chentoufi, A. and El Fatm, A. and Bekri, A. and Benhlima, S. and Sabbane, M.
(2017)
*A heuristic method based on multi-objective optimization concept for solving RNA multiple alignment.*
International Review of Automatic Control, 10 (5).
pp. 371-379.

Cherouat, A. and Radi, B. and El Hami, A.
(2008)
*The frictional contact of the composite fabric's shaping.*
Acta Mechanica, 199 (1-4).
pp. 29-41.

Cherouat, A. and Radi, B. and El Hami, A.
(2009)
*The study of the composites fabric's shaping using an augmented lagrangian approach.*
Multidiscipline Modeling in Materials and Structures, 5 (2).
pp. 185-198.

Chinig, A. and Bennis, H.
(2017)
*A novel design of an H-shaped microstrip diplexer.*
Journal of Microwaves, Optoelectronics and Electromagnetic Applications, 16 (4).
pp. 966-981.

Dahbi, S. and Ezzine, L. and El Moussami, H.
(2017)
*Modeling of cutting performances in turning process using multiple regression method.*
International Journal of Engineering Research in Africa, 29.
pp. 54-69.

Daridon, L. and Oussouaddi, O. and Ahzi, S.
(2004)
*Influence of the material constitutive models on the adiabatic shear band spacing: MTS, power law and Johnson-Cook models.*
International Journal of Solids and Structures, 41 (11-12).
pp. 3109-3124.

Darmane, Y. and Cherkaoui, M. and Kitane, S. and Alaoui, A. and Sebban, A. and Touhami, M.E.
(2008)
*Preparation of chemical manganese dioxide from Moroccan pyrolusite mine waste.*
Hydrometallurgy, 92 (1-2).
pp. 73-78.

Doukat, D. and Lichioui, A. and Fares, A. and Bouzid, A.
(2001)
*Matching technique of objects in radars with stereoscopic vision.*
Journal of Microwaves and Optoelectronics, 2 (3).
pp. 46-56.

Echchakhaoui, K. and Abdelmounim, E. and Zbitou, J. and Bennis, H. and Errkik, A. and Sanchez, A.M.
(2018)
*A novel structure of a wideband zero-bias power limiter for ISM band.*
Telkomnika (Telecommunication Computing Electronics and Control), 16 (6).
pp. 2481-2491.

El Abbassi, A. and Amhouche, Y. and Bendada, E. and Rmaily, R. and Raïs, K.
(2001)
*Characterization of series resistances and mobility attenuation phenomena in short channel MOS transistors.*
Active and Passive Electronic Components, 24 (1).
pp. 13-22.

El Amine, M. and Sallaou, M.
(2019)
*Integration of mechanical deformation and optical losses in the design of linear Fresnel solar collectors.*
International Journal on Interactive Design and Manufacturing, 13 (3).
pp. 831-840.

El Amrani, A. and El Amraoui, M. and El Abbassi, A. and Messaoudi, C.
(2014)
*Nonlinear phenomenon in monocrystalline silicon based PV module for low power system: Lead acid battery for low energy storage.*
Superlattices and Microstructures, 75.
pp. 39-46.

El Amrani, A. and Lucas, B. and Antony, R.
(2015)
*Organic optocoupler consisting of an optimized blue organic light emitting diode and an organic photoconductor.*
Superlattices and Microstructures, 85.
pp. 880-885.

El Amrani, A. and Lucas, B. and Ratier, B.
(2012)
*The effect of the active layer thickness on the performance of pentacene-based phototransistors.*
Synthetic Metals, 161 (23-24).
pp. 2566-2569.

El Amraoui, M. and Haddad, M. and Bejjit, L. and Ait Lyazidi, S. and Lakhal, R.
(2017)
*On-site XRF characterization of archaeological materials in CERA center of Rissani (Morocco).*
In: UNSPECIFIED.

El Barghouti, M. and Akjouj, A. and Mir, A.
(2018)
*Numerical analysis of MoS2 on the LSPR in periodical nanostructure of Ag arrays/graphene for sensitive sensors.*
International Journal of Microwave and Optical Technology, 13 (5).
pp. 454-461.

El Beqal, A. and Benhala, B. and Zorkani, I.
(2018)
*Sizing of three-stage bipolar transistor amplifier by the genetic algorithm.*
In: UNSPECIFIED.

El Boubakraoui, M.C. and Bri, S. and Foshi, J.
(2018)
*Dielectric properties of SiCf/SiC composites.*
FME Transactions, 46 (1).
pp. 86-92.

El Fatmi, A. and Bekri, M.A. and Benhlima, S.
(2018)
*RNA secondary structure prediction based on genetic algorithm and comparative approach.*
In: UNSPECIFIED.

El Fattahi, L. and Sbai, E.H.
(2019)
*Vehicle trajectory clustering using variable kernel estimator.*
Lecture Notes in Electrical Engineering, 519.
pp. 107-112.

El Gadari, A. and El Ouardi, H. and Alibou, S. and Askari, K. and Sharifzadeh, M. and Ounejjar, Y. and Al-Haddad, K.
(2019)
*Photovoltaic System Based on the PUC9 Inverter.*
In: UNSPECIFIED.

El Gadari, M. and Fatu, A. and Hajjam, M.
(2015)
*Shaft roughness effect on elasto-hydrodynamic lubrication of rotary lip seals: Experimentation and numerical simulation.*
Tribology International, 88.
pp. 218-227.

El Ghazi, H. and Jorio, A. and Zorkani, I. and Feddi, E.M. and El Mouchtachi, A.
(2018)
*Wetting layer effect on impurity-related electronic properties of different (In,Ga)N QD-shapes.*
Physica B: Condensed Matter, 537.
pp. 207-211.

El Hamraoui, A. and Abdelmounim, E.H. and Zbitou, J. and Bennis, H. and Tajmouati, A. and Latrach, M.
(2018)
*A compact low cost dual-band slot antenna for RFID readers.*
International Journal of Microwave and Optical Technology, 13 (1).
pp. 89-97.

El Hamraoui, A. and Abdelmounim, E.H. and Zbitou, J. and Elabdellaoui, L. and Bennis, H. and Latrach, M.
(2018)
*A new compact CPW-fed dual-band uniplanar antenna for RFID applications.*
Telkomnika (Telecommunication Computing Electronics and Control), 16 (1).
pp. 102-109.

El Hamraoui, A. and Abdelmounim, E.H. and Zbitou, J. and Errkik, A. and Bennis, H. and Latrach, M.
(2018)
*A dual-band microstrip slot antenna reader for UHF and microwave RFID applications.*
Telkomnika (Telecommunication Computing Electronics and Control), 16 (1).
pp. 94-101.

El Harraki, I. and Boutoulout, A.
(2015)
*A notes on the boundary gradient controllability for hyperbolic systems: Approaches and simulations.*
International Review of Automatic Control, 8 (3).
pp. 170-179.

El Harti, K. and Rahmoune, M. and Sanbi, M. and Saadani, R. and Bentaleb, M. and Rahmoune, M.
(2019)
*Finite element model of vibration control for an exponential functionally graded Timoshenko beam with distributed piezoelectric sensor/actuator.*
Actuators, 8 (1).

El Harti, K. and Sanbi, M. and Rahmoune, M. and Saadani, R. and Agounoun, R. and Bentaleb, M. and Rahmoune, M.
(2017)
*Active vibration control of sandwich FGM beam with piezoelectric sensor/actuator.*
International Journal of Applied Engineering Research, 12 (20).
pp. 9338-9345.

El Hassani, S. and Haidine, A. and Jebbar, H.
(2019)
*Road to 5G: Key enabling technologies.*
Journal of Communications, 14 (11).
pp. 1034-1048.

El Kinani, R. and Benhamou, M. and Kaïdi, H.
(2017)
*Statistical Mechanics of Confined Biological Materials.*
In: UNSPECIFIED.

El Mejdoubi, A. and Chaoui, H. and Gualous, H. and Oukaour, A. and Slamani, Y. and Sabor, J.
(2016)
*Supercapacitors State-of-Health diagnosis for electric vehicle applications.*
World Electric Vehicle Journal, 8 (2).
pp. 379-387.

El Mejdoubi, A. and Chaoui, H. and Gualous, H. and Sabor, J.
(2017)
*Online parameter identification for supercapacitor state-of-health diagnosis for vehicular applications.*
IEEE Transactions on Power Electronics, 32 (12).
pp. 9355-9363.

El Mejdoubi, A. and Chaoui, H. and Sabor, J. and Gualous, H.
(2018)
*Remaining Useful Life Prognosis of Supercapacitors under Temperature and Voltage Aging Conditions.*
IEEE Transactions on Industrial Electronics, 65 (5).
pp. 4357-4367.

El Mejdoubi, A. and Oukaour, A. and Chaoui, H. and Gualous, H. and Sabor, J. and Slamani, Y.
(2016)
*Prediction Aging Model for Supercapacitor's Calendar Life in Vehicular Applications.*
IEEE Transactions on Vehicular Technology, 65 (6).
pp. 4253-4263.

El Mejdoubi, A. and Oukaour, A. and Chaoui, H. and Gualous, H. and Sabor, J. and Slamani, Y.
(2016)
*State-of-Charge and State-of-Health Lithium-Ion Batteries' Diagnosis According to Surface Temperature Variation.*
IEEE Transactions on Industrial Electronics, 63 (4).
pp. 2391-2402.

El Mejdoubi, A. and Oukaour, A. and Chaoui, H. and Slamani, Y. and Sabor, J. and Gualous, H.
(2016)
*Online supercapacitor diagnosis for electric vehicle applications.*
IEEE Transactions on Vehicular Technology, 65 (6).
pp. 4241-4252.

El Mghouchi, Y. and Chham, E. and Zemmouri, E.M. and El Bouardi, A.
(2019)
*Assessment of different combinations of meteorological parameters for predicting daily global solar radiation using artificial neural networks.*
Building and Environment, 149.
pp. 607-622.

El Mouhri, S. and Ettaqi, S. and Laazizi, A. and Benayoun, S.
(2015)
*FSW of aluminum alloys: Effect of operating parameters on the weld quality.*
Key Engineering Materials, 640.
pp. 43-50.

El Moussaouy, A. and Ouchani, N. and El Hassouani, Y. and Abouelaoualim, D.
(2014)
*Temperature and hydrostatic pressure effects on exciton-phonon coupled states in semiconductor quantum dot.*
Superlattices and Microstructures, 73.
pp. 22-37.

El Mzioui, S. and Bouzzine, S.M. and Bourass, M. and Naciri Bennani, M. and Hamidi, M.
(2019)
*A theoretical investigation of the optoelectronic performance of some new carbazole dyes.*
Journal of Computational Electronics, 18 (3).
pp. 951-961.

El Omari, M. and Hafidi, E. and El Omari, M. and Abaouz, A. and Yacoubi, A. and Reau, J.M. and Sénégas, J.
(2002)
*Short-range order and diffusion processes in the Na1-xBixF1+2x anion-excess solid solution.*
Materials Letters, 53 (3).
pp. 138-144.

El Ouadghiri, D. and Bakhouya, M. and Bitam, S.
(2014)
*Editorial.*
Journal of Mobile Multimedia, 10 (1-2).
pp. 58-59.

El Rhafiki, T. and Kousksou, T. and Allouhi, A. and Benomar, W. and Zennouhi, H. and Jamil, A. and Zeraouli, Y.
(2017)
*Numerical analysis of a micro-encapsulated PCM wallboard: Fluxmeter applications.*
Journal of Building Engineering, 14.
pp. 127-133.

El barghouti, M. and Mir, A. and Akjouj, A. and Szunerits, S.
(2019)
*Modulation of localized surface plasmon resonances of a silver nanoparticle array upon the presence of MoS2 coatings or underlying thin films.*
Optik, 179.
pp. 819-827.

El gadari, M. and Fatu, A. and Hajjam, M.
(2016)
*Effect of grooved shaft on the rotary lip seal performance in transient condition: Elasto-hydrodynamic simulations.*
Tribology International, 93.
pp. 411-418.

El-Moudny, S. and Badia, M. and Benhamou, M.
(2017)
*Spherical Brownian diffusion of particles on liquid-liquid interfaces of Pickering emulsions.*
In: UNSPECIFIED.

El-Moudny, S. and Badia, M. and Benhamou, M.
(2017)
*Structural study of emulsions stabilized by charged nanoparticles.*
In: UNSPECIFIED.

Elboubakraoui, C. and Bri, S. and Foshi, J.
(2017)
*Electromagnetic properties of polymer composites Co52Cr22Ni10W7,5Fe1,5 and Fe59Cr21,5Ni7Si1Mn10 at Ku band.*
FME Transactions, 45 (4).
pp. 678-683.

Elboubakraoui, M.C. and Bri, S. and Foshi, J.
(2017)
*Electromagnetic Properties of Composites CoFeNiBSiMo, CoFeBSiCr and CoMnSiB in wide frequency bande.*
In: UNSPECIFIED.

Elboubakraoui, M.C. and Bri, S. and Jebbor, N. and Foshi, J.
(2016)
*Electromagnetic properties of microwire composites COFENIBSIMO, COFEBSICR and COFESIB in the X and Ku band.*
Nova Science Publishers, Inc., pp. 1-28.

Elfatimi, A. and Bri, S. and Saadi, A.
(2018)
*Comparison between techniques feeding for simple rectangular, circular and triangular patch antenna at 2.45 GHz.*
In: UNSPECIFIED.

Elmaguiri, M.N. and El Alaiji, R. and Haterbouch, M. and Oussouaddi, O.
(2015)
*Geometrically nonlinear free vibration of exponential functionally graded beams.*
International Journal of Applied Engineering Research, 10 (24).
pp. 44589-44596.

Es-Saghiri, A. and Boufounas, E.-M. and El Amrani, A. and Lucas, B.
(2018)
*High on-off current modulation ratio investigated at onset voltage for an organic thin film transistor.*
In: UNSPECIFIED.

Essehli, R. and Bali, B.E. and Benmokhtar, S. and Bouziane, K. and Manoun, B. and Abdalslam, M.A. and Ehrenberg, H.
(2011)
*Crystal structures and magnetic properties of iron (III)-based phosphates: Na4NiFe(PO4)3 and Na2Ni 2Fe(PO4)3.*
Journal of Alloys and Compounds, 509 (4).
pp. 1163-1171.

Essehli, R. and El Bali, B. and Faik, A. and Benmokhtar, S. and Manoun, B. and Zhang, Y. and Zhang, X.J. and Zhou, Z. and Fuess, H.
(2012)
*Structural changes upon lithium insertion in Ni 0.5TiOPO 4.*
Journal of Alloys and Compounds, 530.
pp. 178-185.

Ezzahri, L. and Boutoulout, A. and El Alaoui, F.-Z.
(2015)
*Minimum energy input control problem on a constrained boundary subregion.*
International Review of Automatic Control, 8 (1).
pp. 39-43.

Ezzahri, L. and El Harraki, I. and Boutoulout, A.
(2018)
*Enlarged controllability for hyperbolic linear systems with zone actuators.*
International Journal of Dynamics and Control, 6 (4).
pp. 1516-1522.

Ezzine, L. and Guerbaoui, M. and El Afou, Y. and Ed-Dahhak, A. and Lachhab, A. and Belkoura, L. and Bouchikhi, B.
(2010)
*Implementation of identification algorithm using recurrent RBF neural networks for the inside temperature in a greenhouse.*
In: UNSPECIFIED.

Faquir, S. and Yahyaouy, A. and Tairi, H. and Sabor, J.
(2018)
*Energy Management of An Extended Hybrid Renewable Energy System for Isolated Sites Using A Fuzzy Logic Controller.*
In: UNSPECIFIED.

Fares, A. and Bouzid, A. and Hamdi, M.
(2000)
*Rotation invariance using diffraction pattern sampling in optical pattern recognition.*
Journal of Microwaves and Optoelectronics, 2 (2).
pp. 33-39.

Fattah, J. and Ezzine, L. and Lachhab, A.
(2017)
*Evaluating the performance of a production line by the overall equipment effectiveness: An approach based on best maintenance practices.*
International Journal of Engineering Research in Africa, 30.
pp. 181-189.

Feraoun, A. and Amraoui, S. and Kerouad, M.
(2019)
*Reentrant phenomena of a mixed spin (5/2,3/2) Isotropic Blume–Emery–Griffiths model (BEG) on a graphene layer.*
Superlattices and Microstructures, 136.

Gadari, M.E. and Hajjam, M.
(2018)
*Effect of the Grooved Rod on the Friction Force of U-Cup Hydraulic Rod Seal with Rough Lip.*
Tribology Transactions, 61 (4).
pp. 661-670.

Giri, F. and Brouri, A. and Ikhouane, F. and Chaoui, F.Z. and Radouane, A.
(2013)
*Identification of hammerstein-wiener systems including backlash input nonlinearities.*
In: UNSPECIFIED.

Giri, F. and Radouane, A. and Brouri, A. and Chaoui, F.-Z.
(2014)
*Combined frequency-prediction error identification approach for Wiener systems with backlash and backlash-inverse operators.*
Automatica, 50 (3).
pp. 768-783.

Hachami, K. and Moussaid, D. and Rahmoun, M. and Bendada, E.
(2001)
*Utilization of the thermoelectric sensor to realize a new fluid level detector.*
Active and Passive Electronic Components, 24 (3).
pp. 177-186.

Hachami, K. and Moussaid, D. and Rahmoun, M. and El Hassani, A.
(2000)
*Design and realization a new thermoelectric sensor, application.*
Active and Passive Electronic Components, 23 (3).
pp. 145-155.

Hadda, M. and Tilioua, M.
(2012)
*Thin film limits in magnetoelastic interactions.*
Mathematical Problems in Engineering, 2012.

Haddad, M. and Nadiri, A. and Biyadi, A. and Archidi, M.E. and Folgado, J.V. and Beltran-Porter, D.
(1992)
*Computer simulations of electron paramagnetic resonance spectra of P2O5Li2WO4Li2O glasses.*
Journal of Alloys and Compounds, 188 (C).
pp. 161-164.

Haddi, Z. and Amari, A. and Annanouch, F.E. and Ould Ali, A. and El Bari, N. and Bouchikhi, B.
(2011)
*Potential of a portable electronic nose for control quality of moroccan traditional fresh cheeses.*
Sensor Letters, 9 (6).
pp. 2229-2231.

Haddi, Z. and Annanouch, F. and Amari, A. and Hadoune, A. and Bouchikhi, B. and El Bari, N.
(2010)
*Application of a portable electronic nose device to discriminate and identify cheeses with known percentages of cow's and goat's milk.*
In: UNSPECIFIED.

Haddi, Z. and Boughrini, M. and Ihlou, S. and Amari, A. and Mabrouk, S. and Barhoumi, H. and Maaref, A. and Bari, N.E. and Llobet, E. and Jaffrezic-Renault, N. and Bouchikhi, B.
(2012)
*Geographical classification of Virgin Olive Oils by combining the electronic nose and tongue.*
In: UNSPECIFIED.

Haddi, Z. and Sbartai, A. and Namour, P. and El Bari, N. and Bouchikhi, B. and Jaffrezic-Renault, N.
(2014)
*Design and development of a voltammetric electronic tongue for metal detection Conception et développement d'une langue électronique voltammétrique pour la détection des métaux lourds.*
Instrumentation Mesure Metrologie, 14 (1-2).
pp. 115-131.

Hafiane, M. and Sabor, J. and Taleb, M.
(2017)
*Wind turbine optimal power control based on adaptive twisting algorithm: application to capsim-wind farm in Morocco.*
International Journal of Mechanical Engineering and Technology, 8 (10).
pp. 390-400.

Hajar, M. and Blanc, R.H.
(1998)
*Linear thermoviscoelasticity. Part I: A functional model.*
Acta Mechanica, 130 (3-4).
pp. 175-183.

Hajar, M. and Blanc, R.H.
(1998)
*Linear thermoviscoelasticity. Part II: Energy balances.*
Acta Mechanica, 130 (3-4).
pp. 185-197.

Halimi, M. and Outana, I. and El Amrani, A. and Diouri, J. and Messaoudi, C.
(2019)
*Data visualization and statistical analysis of a solar parabolic trough collector possesses of filled-type evacuated tube with U shaped, under south-eastern of Morocco.*
Lecture Notes in Electrical Engineering, 519.
pp. 672-678.

Hamdaoui, S. and Mahdaoui, M. and Kousksou, T. and El Afou, Y. and Ait Msaad, A. and Arid, A. and Ahachad, A.
(2019)
*Thermal behaviour of wallboard incorporating a binary mixture as a phase change material.*
Journal of Building Engineering, 25.

Hamidi-Alaoui, Z. and El Belrhiti El Alaoui, A.
(2019)
*FM-MAC: A fast-mobility adaptive MAC protocol for wireless sensor networks.*
Transactions on Emerging Telecommunications Technologies.

Hamidi-Alaoui, Z. and Elalaoui, A.E.
(2018)
*A WSN-based approach for prioritising emergency vehicles : PPerformance analysis of medium access control.*
In: UNSPECIFIED.

Hassib, M.H. and Chillali, A. and Elomary, M.A.
(2013)
*Special ideal ring A3 and cryptography.*
In: UNSPECIFIED.

Hassouna, M. and Ouhadan, A. and El Kinani, E.H.
(2019)
*On the stability of proliferation of kertinocytes in psoriatic skin fractional model.*
Mathematical Methods in the Applied Sciences.

Haterbouch, M. and Benamar, R.
(2005)
*Geometrically nonlinear free vibrations of simply supported isotropic thin circular plates.*
Journal of Sound and Vibration, 280 (3-5).
pp. 903-924.

Haterbouch, M. and Benamar, R.
(2003)
*The effects of large vibration amplitudes on the axisymmetric mode shapes and natural frequencies of clamped thin isotropic circular plates. Part I: Iterative and explicit analytical solution for non-linear transverse vibrations.*
Journal of Sound and Vibration, 265 (1).
pp. 123-154.

Haterbouch, M. and Benamar, R.
(2004)
*The effects of large vibration amplitudes on the axisymmetric mode shapes and natural frequencies of clamped thin isotropic circular plates. Part II: Iterative and explicit analytical solution for non-linear coupled transverse and in-plane vibrations.*
Journal of Sound and Vibration, 277 (1-2).
pp. 1-30.

Hmina, K. and Sallaou, M. and Arbaoui, A. and Lasri, L.
(2018)
*A preliminary design innovation aid methodology based on energy analysis and TRIZ tools exploitation.*
International Journal on Interactive Design and Manufacturing, 12 (3).
pp. 919-928.

Houmad, M. and Essaoudi, I. and Ainane, A. and El Kenz, A. and Benyoussef, A. and Ahuja, R.
(2019)
*Improving the electrical conductivity of Siligraphene SiC7 by strain.*
Optik, 177.
pp. 118-122.

Hssikou, M. and Baliti, J. and Alaoui, M.
(2019)
*Continuum analysis of rarefaction effects on a thermally induced gas flow.*
Mathematical Problems in Engineering, 2019.

Hssikou, M. and Baliti, J. and Alaoui, M.
(2018)
*Numerical analysis of non-isothermal walls driven-gas flow.*
International Journal of Engineering Systems Modelling and Simulation, 10 (2).
pp. 63-74.

Ihamji, M. and Abdelmounim, E.H. and Zbitou, J. and Bennis, H. and Latrach, M.
(2018)
*A miniature L-slot microstrip printed antenna for RFID.*
Telkomnika (Telecommunication Computing Electronics and Control), 16 (5).
pp. 1923-1930.

Jebbor, N. and Bri, S.
(2012)
*A microwave method for complex permittivity extraction of thin materials.*
Journal of Microwaves, Optoelectronics and Electromagnetic Applications, 11 (2).
pp. 285-295.

Jebbor, N. and Bri, S. and Sánchez, A.M. and Chaibi, M.
(2013)
*A fast calibration-independent method for complex permittivity determination at microwave frequencies.*
Measurement: Journal of the International Measurement Confederation, 46 (7).
pp. 2206-2209.

Jenhi, M. and Roukhe, A. and Hlou, L.
(2019)
*Comparative evaluation of different HFCC filter-bank using Vector Quantization (VQ) approach based text dependent speaker identification system.*
ARPN Journal of Engineering and Applied Sciences, 14 (9).
pp. 1675-1685.

Jouilel, N. and Radouani, M. and El Fahime, B.
(2018)
*Parametric uncertainties effect on the performance of HAWT's induction machine: Bond graph approach.*
In: UNSPECIFIED.

Kacimi, R. and Abram, T. and Bourass, M. and Bejjit, L. and Alimi, K. and Bouachrine, M.
(2019)
*Molecular design of D–A–D conjugated molecules based on fluorene for organic solar cells.*
Optical and Quantum Electronics, 51 (3).

Kamal, A. and Boutoulout, A. and Beinane, S.A.O.
(2010)
*Regional boundary controllability of semi-linear distributed parabolic systems.*
International Review of Automatic Control, 3 (4).
pp. 378-387.

Kerkouri, N. and Haddad, M. and Et-Tabirou, M. and Chahine, A. and Laânab, L.
(2011)
*FTIR, Raman, EPR and optical absorption spectral studies on V 2O5-doped cadmium phosphate glasses.*
Physica B: Condensed Matter, 406 (17).
pp. 3142-3148.

Khammour, F. and Ainane, A. and Kenz, A. and Talbi, M. and Elkouali, M. and Ainane, T. and Elmatar, M. and Ainane, T.
(2018)
*Mechanical properties of particleboards based on mint waste manufactured from different content of urea formaldehyde adhesive.*
International Journal of Mechanical Engineering and Technology, 9 (4).
pp. 756-762.

Khattabi, E.M.E. and Mharzi, M. and Raefat, S. and Meghari, Z.
(2018)
*On the application of a new thermal diagnostic model: The passive elements equivalent in term of ventilation inside a room.*
In: UNSPECIFIED.

Khazari, A. and Boutoulout, A. and El Alaoui, F.Z.
(2018)
*Regional boundary gradient observability of semilinear hyperbolic systems via HUM approach.*
IMA Journal of Mathematical Control and Information, 35 (1).
pp. 75-92.

Khellouki, A. and Rech, J. and Zahouani, H.
(2013)
*Energetic analysis of cutting mechanisms in belt finishing of hard materials.*
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 227 (9).
pp. 1409-1413.

Khellouki, A. and Rech, J. and Zahouani, H.
(2007)
*Influence of the belt-finishing process on the surface texture obtained by hard turning.*
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 221 (7).
pp. 1129-1137.

Khellouki, A. and Rech, J. and Zahouani, H.
(2013)
*Micro-scale investigation on belt finishing cutting mechanisms by scratch tests.*
Wear, 308 (1-2).
pp. 17-28.

Khellouki, A. and Rech, J. and Zahouani, H.
(2007)
*The effect of abrasive grain's wear and contact conditions on surface texture in belt finishing.*
Wear, 263 (1-6 SP).
pp. 81-87.

Khellouki, A. and Rech, J. and Zahouani, H.
(2010)
*The effect of lubrication conditions on belt finishing.*
International Journal of Machine Tools and Manufacture, 50 (10).
pp. 917-921.

Khrissi, S. and Bejjit, L. and Haddad, M. and Falguères, C. and Ait Lyazidi, S. and El Amraoui, M.
(2018)
*Study of marbles from Middle Atlas (Morocco): Elemental, mineralogical and structural analysis.*
In: UNSPECIFIED.

Khrissi, S. and Haddad, M. and Bejjit, L. and Ait Lyazidi, S. and El Amraoui, M. and Falguères, C.
(2017)
*Raman and XRD characterization of Moroccan Marbles.*
In: UNSPECIFIED.

Kotti, M. and Fakhfakh, M. and Benhala, B. and Hachimi, H.
(2019)
*Performance comparison of nature-inspired metaheuristics in the optimal sizing of analog circuits.*
In: UNSPECIFIED.

Kousksou, T. and Alaphilippe, M. and Jamil, A. and El Rhafiki, T. and Mouqalid, M. and Zeraouli, Y.
(2014)
*An implicit enthalpy formulation for macroscopic eutectic and progressive melting: DSC (Differential Scanning Calorimetry) applications.*
Energy, 66.
pp. 919-926.

Kousksou, T. and Mahdaoui, M. and Ahmed, A. and Msaad, A.A.
(2014)
*Melting over a wavy surface in a rectangular cavity heated from below.*
Energy, 64.
pp. 212-219.

Lachheb, A. and Elmarhoune, M. and Saadani, R. and Agounoun, R. and Rahmoune, M. and Sbai, K.
(2017)
*An experimental investigation on the thermophysical properties of a composite basis of natural fibers of alfa.*
International Journal of Mechanical and Mechatronics Engineering, 17 (4).
pp. 37-42.

Lagrioui, A. and Bennis, G. and Karim, M. and Felja, M.
(2018)
*Comparison between the conventional PSO method and modified PSO method for PV system under shading.*
WSEAS Transactions on Systems and Control, 13.
pp. 186-192.

Lahjouji, I. and El Gadari, M. and Radouani, M.
(2019)
*Numerical investigation of grooved shaft effects on the rotary lip seal performance with relative lip motion.*
Lubricants, 7 (2).

Laiarinandrasana, L. and Kabiri, M.R. and Reytier, M.
(2006)
*Effect of specimen geometries on the C* versus da/dt master curve for type 316L stainless steel.*
Engineering Fracture Mechanics, 73 (6).
pp. 726-737.

Laiarinandrasana, L. and Kabiri, R.
(2006)
*Specimen geometry effect on creep crack growth in 316L(N).*
Fatigue and Fracture of Engineering Materials and Structures, 29 (2).
pp. 145-155.

Laila, K. and Adil, B.
(2019)
*Nonlinear numerical study of mutual inductances for switched reluctance machine.*
Lecture Notes in Electrical Engineering, 519.
pp. 344-349.

Lairgi, L. and Daya, A. and Elotmani, R. and Touzani, M.
(2019)
*Contribution to the study of the energy needs for a building in the city of errachidia influence of orientation and local materials.*
Key Engineering Materials, 820.
pp. 18-28.

Lakrit, S. and Das, S. and El Alami, A. and Barad, D. and Mohapatra, S.
(2019)
*A compact UWB monopole patch antenna with reconfigurable Band-notched characteristics for Wi-MAX and WLAN applications.*
AEU - International Journal of Electronics and Communications, 105.
pp. 106-115.

Lamaazi, H. and Benamar, N. and Jara, A.J.
(2017)
*Study of the impact of designed objective function on the RPL-based routing protocol.*
Lecture Notes in Electrical Engineering, 397.
pp. 67-80.

Lamini, C. and Fathi, Y. and Behlima, S.
(2017)
*A fuzzy path planning system based on a collaborative reinforcement learning.*
International Review of Automatic Control, 10 (2).
pp. 126-135.

Lamrhari, M. and Sarsri, D. and Azrar, L. and Rahmoune, M. and Sbai, K.
(2016)
*Finite element reduced order models for nonlinear vibrations of large systems with uncertain parameters.*
In: UNSPECIFIED.

Lamrhari, M. and Sarsri, D. and Azrar, L. and Rahmoune, M. and Sbai, K.
(2017)
*Nonlinear vibrations of large structures with uncertain parameters.*
Advances in Mechanical Engineering, 9 (7).

Lamterkati, J. and Khafallah, M. and Ouboubker, L. and El Afia, A. and Chaikhy, H.
(2018)
*Implementation of voltage oriented control of 3-phase PWM rectifier, via. fuzzy and PI controller for output voltage regulation.*
Journal of Engineering and Applied Sciences, 13 (14).
pp. 5756-5763.

Lasri, L. and Nouari, M. and Mansori, M.E.
(2011)
*Wear resistance and induced cutting damage of aeronautical FRP components obtained by machining.*
Wear, 271 (9-10).
pp. 2542-2548.

Lassri, M. and Omri, M. and Ouahmane, H. and Abid, M. and Ayadi, M. and Krishnan, R.
(2004)
*Magnetization and ferromagnetic resonance studies in Co/V multilayers.*
Physica B: Condensed Matter, 344 (1-4).
pp. 319-324.

Levshov, D. and Michel, T. and Paillet, M. and Than, X.T. and Tran, H.N. and Arenal, R. and Rahmani, A. and Boutahir, M. and Zahab, A.-A. and Sauvajol, J.-L.
(2014)
*Coupled vibrations in index-identified carbon nanotubes.*
In: UNSPECIFIED.

Limnios, N. and Ouhbi, B. and Platis, A. and Sapountzoglou, G.
(2006)
*Nonparametric estimation of performance and performability for semi-Markov processes.*
International Journal of Performability Engineering, 2 (1).
pp. 19-27.

Loubna, K. and Bachir, B. and Izeddine, Z.
(2018)
*Optimal digital IIR filter design using ant colony optimization.*
In: UNSPECIFIED.

Loudari, S.E. and Benamar, M. and Benamar, N.
(2016)
*New classification of nodes cooperation in delay tolerant networks.*
Lecture Notes in Electrical Engineering, 366.
pp. 301-309.

Lucas, B. and El Amrani, A. and Moliton, A. and Skaiky, A. and El Hajj, A. and Aldissi, M.
(2012)
*Charge transport properties in pentacene films: Evaluation of carrier mobility by different techniques.*
Solid-State Electronics, 69.
pp. 99-103.

Magoussi, H. and Zaim, A. and Kerouad, M.
(2013)
*Effects of the random magnetic field on the hysteresis behavior of spin-1 Ising nanotube.*
Journal of Optoelectronics and Advanced Materials, 15 (5-6).
pp. 481-486.

Mahdaoui, M. and Ait Msaad, A. and Mouqallid, M. and Affad, E.
(2012)
*The effect of the random inflow conditions and initial conditions to cycle-to-cycle variations using detachment eddy simulation.*
SAE Technical Papers, 9.

Mahdaoui, M. and Kousksou, T. and Marín, J.M. and El Rhafiki, T. and Zeraouli, Y.
(2014)
*Laminar flow in circular tube with internal solidification of a binary mixture.*
Energy, 78.
pp. 713-719.

Maouhoub, S. and Aoura, Y. and Mir, A.
(2015)
*FEM simulation of Rayleigh waves for SAW devices based on ZnO/AlN/Si.*
Microelectronic Engineering, 136.
pp. 22-25.

Mkhida, A. and Barger, P. and Thiriet, J.M. and Aubry, J.F.
(2005)
*Influence of the control strategy choice on the safety level of a distributed control system.*
In: UNSPECIFIED.

Mkhida, A. and Bououlid, B. and Thiriet, J.M.
(2010)
*Dependability evaluation of Safety Instrumented Systems incorporating intelligent instruments.*
In: UNSPECIFIED.

Mlika, R. and Yousfi, H. and Bouchikhi, B. and Dumazet-Bonnamour, L. and Jaffrezic-Renault, N. and Ben Ouada, H.
(2009)
*Transducing effect on detection performances of copper cations, using Azo-calix4arene derivatives as receptors.*
Sensor Letters, 7 (5).
pp. 917-923.

Mokhtari, B. and Eddeqaqi, N.C. and Atangana, J. and Essama, B.G.O. and Kofane, T.C.
(2014)
*Nonlinear dispersion equation and guided modes in a slab waveguide composed of a negative-index medium.*
Optical and Quantum Electronics, 46 (1).
pp. 155-163.

Mokhtari, B. and Hissi, N.E.H. and Bahsine, S. and Eddeqaqi, N.C. and Shabat, M.M.
(2017)
*Theoretical design of a three-layered structure based on left handed material for absorption enhancement in solar cells.*
Micro and Nanosystems, 9 (2).
pp. 97-101.

Mouallif, I. and Latrach, A. and Chergui, M. and Benali, A. and Elghorba, M. and Mouallif, Z. and Hangouët, J.-P. and Barbe, N.
(2014)
*Degradation of dynamic mechanical properties of glass fiber reinforced polyester composite pipes after immersion in various temperatures.*
Journal of Composite Materials, 48 (24).
pp. 3025-3034.

Moukhafi, M. and El Yassini, K. and Bri, S.
(2017)
*A novel anomaly intrusion detection based on SMO optimized by PSO with pre-processing of data set.*
Journal of Mobile Multimedia, 13 (3-4).
pp. 197-209.

Moumen, A. and Oulidi, H.J. and Nafis, F. and Aghoutane, B. and Khazaz, L. and Adina, M.G. and Mansouri, B.E.
(2016)
*Web services for sharing and reuse water data in morocco.*
Lecture Notes in Electrical Engineering, 381.
pp. 297-302.

Moumni, M. and Tilioua, M.
(2016)
*UNSPECIFIED*
Journal of Engineering Mathematics, 100 (1).
pp. 107-108.

Moumni, M. and Tilioua, M.
(2016)
*A finite-difference scheme for a model of magnetization dynamics with inertial effects.*
Journal of Engineering Mathematics, 100 (1).
pp. 95-106.

Moussaoui, F. and Benamar, R.
(2003)
*Non-linear vibrations of shell-type structures: A review with bibliography.*
Journal of Sound and Vibration, 255 (1).
pp. 161-184.

Moussaoui, F. and Benamar, R. and White, R.G.
(2001)
*Authors' reply.*
Journal of Sound and Vibration, 243 (1).
pp. 184-189.

Moussaoui, F. and Benamar, R. and White, R.G.
(2000)
*The effects of large vibration amplitudes on the mode shapes and natural frequencies of thin elastic shells, part I: Coupled transverse-circumferential mode shapes of isotropic circular cylindrical shells of infinite length.*
Journal of Sound and Vibration, 232 (5).
pp. 917-943.

Moussaoui, F. and Benamar, R. and White, R.G.
(2002)
*The effects of large vibration amplitudes on the mode shapes and natural frequencies of thin elastic shells. Part II: A new approach for free transverse constrained vibration of cylindrical shells.*
Journal of Sound and Vibration, 255 (5).
pp. 931-963.

Moussout, H. and Ahlafi, H. and Aazza, M. and Bourakhouadar, M.
(2016)
*Kinetics and mechanism of the thermal degradation of biopolymers chitin and chitosan using thermogravimetric analysis.*
Polymer Degradation and Stability, 130.
pp. 1-9.

Moustabchir, H. and Alaoui, M.A.H. and Babaoui, A. and Dearn, K.D. and Pruncu, C.I. and Azari, Z.
(2017)
*The influence of variations of geometrical parameters on the notching stress intensity factors of cylindrical shells.*
Journal of Theoretical and Applied Mechanics (Poland), 55 (2).
pp. 559-569.

Moustabchir, H. and Arbaoui, J. and Azari, Z. and Hariri, S. and Pruncu, C.I.
(2018)
*Experimental/numerical investigation of mechanical behaviour of internally pressurized cylindrical shells with external longitudinal and circumferential semi-elliptical defects.*
Alexandria Engineering Journal, 57 (3).
pp. 1339-1347.

Moustabchir, H. and Arbaoui, J. and Zitouni, A. and Hariri, S. and Dmytrakh, I.
(2015)
*Numerical analysis of stress intensity factor and T-stress in pipeline of steel P264GH submitted to loading conditions.*
Journal of Theoretical and Applied Mechanics, 53 (3).
pp. 665-672.

Moustabchir, H. and Azari, Z. and Hariri, S. and Dmytrakh, I.
(2010)
*Experimental and numerical study of stress-strain state of pressurised cylindrical shells with external defects.*
Engineering Failure Analysis, 17 (2).
pp. 506-514.

Moustabchir, H. and Azari, Z. and Hariri, S. and Dmytrakh, I.
(2012)
*Three-dimensional T-stress to predict the directional stability of crack propagation in a pipeline with external surface crack.*
Key Engineering Materials, 498.
pp. 31-41.

Moustabchir, H. and Pruncu, C.I. and Azari, Z. and Hariri, S. and Dmytrakh, I.
(2016)
*Fracture mechanics defect assessment diagram on pipe from steel P264GH with a notch.*
International Journal of Mechanics and Materials in Design, 12 (2).
pp. 273-284.

Moustabchir, H. and Zitouni, A. and Hariri, S. and Gilgert, J. and Pruncu, C.I.
(2018)
*Experimental–numerical characterization of the fracture behaviour of P264GH steel notched pipes subject to internal pressure.*
Iranian Journal of Science and Technology - Transactions of Mechanical Engineering, 42 (2).
pp. 107-115.

Musumeci, P. and Calcagno, L. and Makhtari, A.
(1998)
*Relaxation phenomena in keV-ion implanted hydrogenated amorphous silicon carbide.*
Materials Science and Engineering A, 253 (1-2).
pp. 296-300.

Nachit, A. and Foshi, J.
(2000)
*Spectral domain integral equation approach of an equilateral triangular microstrip antenna using the moment method.*
Journal of Microwaves and Optoelectronics, 2 (1).
pp. 1-13.

Omari, L.H. and Lekdadri, A. and Hlil, E.K. and Lassri, H. and Moubah, R. and Tozri, A. and Dhahri, E. and Kerouad, M. and Zaim, A.
(2020)
*Nano-sized magnetocaloric compounds investigation by using magnetization measurement and Monte Carlo simulation: Case of LSMO nanoparticles.*
Materials Today Communications, 23.

Onana Essama, B.G. and Atangana, J. and Mokhtari, B. and Cherkaoui Eddeqaqi, N. and Kofane, T.C.
(2014)
*Theoretical model for electromagnetic wave propagation in negative index material induced by cubic-quintic nonlinearities and third-order dispersion effects.*
Optical and Quantum Electronics, 46 (7).
pp. 911-924.

Ouabida, E. and Essadike, A. and Bouzid, A.
(2020)
*Optical correlator based algorithm for driver drowsiness detection.*
Optik, 204.

Ouadoud, A. and Mouchtachi, A. and Boutammachte, N.
(2013)
*Numerical analysis of thermoelastohydrodynamic behavior of an elliptical tow-lobe bearing.*
Advanced Materials Research, 787.
pp. 786-791.

Ouahmane, H. and Lassri, H. and Itri, A. and Khmou, A. and Suran, G.
(1998)
*Magnetic properties in amorphous Co93-x/TbxZr7 thin films.*
Physica B: Condensed Matter, 253 (1-2).
pp. 142-147.

Ouahsine, A. and Smaoui, H. and Senchev, A.
(2006)
*Modelling of tide and tidally induced hydro-sedimentary processes in the eastern part of the English Channel.*
Journal of Marine Environmental Engineering, 8 (4).
pp. 263-297.

Ouaissa, M. and Benmoussa, M. and Rhattoy, A. and Lahmer, M. and Chana, I.
(2018)
*Impact of M2M traffic in random access channel over LTE networks.*
Lecture Notes in Electrical Engineering, 443.
pp. 11-19.

Ouaissa, M. and Rhattoy, A. and Lahmer, M.
(2018)
*Analysis of authentication and key agreement (AKA) protocols in long-term evolution (LTE) access network.*
Lecture Notes in Electrical Engineering, 443.
pp. 1-9.

Ouballouch, A. and Elalaiji, R. and Ouahmane, I. and Lasri, L. and Sallaou, M.
(2019)
*Finite element analysis of a FDM 3D printer liquefier.*
Key Engineering Materials, 820.
pp. 173-178.

Ouhbi, B. and Berqia, A.
(2017)
*Editorial.*
Journal of Mobile Multimedia, 13 (3-4).
pp. 181-182.

Oukili, S. and Bri, S.
(2016)
*FPGA implementation of Data Encryption Standard using time variable permutations.*
In: UNSPECIFIED.

Oukili, S. and Bri, S.
(2017)
*High throughput FPGA implementation of Advanced Encryption Standard algorithm.*
Telkomnika (Telecommunication Computing Electronics and Control), 15 (1).
pp. 494-503.

Ould Beinane, S. and Kamal, A. and Boutoulout, A.
(2013)
*Regional gradient controllability of semi-linear parabolic systems.*
International Review of Automatic Control, 6 (5).
pp. 641-653.

Ourhdir, R. and Rachidi, M.
(2019)
*Adaptive input-output feedback linearization control of doubly-fed induction machine in wind power generation.*
International Review of Automatic Control, 12 (1).
pp. 11-20.

Ousegui, A. and Asbik, M.
(2018)
*Modelling and simulation of "free Cooling" process applied to building construction.*
In: UNSPECIFIED.

Outanoute, M. and Selmani, A. and Guerbaoui, M. and Ed-Dahhak, A. and Lachhab, A. and Bouchikhi, B.
(2018)
*Predictive control algorithm using laguerre functions for greenhouse temperature control.*
International Journal of Control and Automation, 11 (10).
pp. 11-20.

Ouzahra, M.
(2007)
*Stabilization with decay estimate for a class of distributed bilinear systems.*
European Journal of Control, 13 (5).
pp. 509-515.

Ouzahra, M. and Tsouli, A. and Boutoulout, A.
(2015)
*Exact controllability of the heat equation with bilinear control.*
Mathematical Methods in the Applied Sciences, 38 (18).
pp. 5074-5084.

Plestan, F. and Yan, X. and Taleb, M. and Estrada, A.
(2016)
*Adaptive solutions for robust control of electropneumatic actuators.*
Institution of Engineering and Technology, pp. 387-406.

Pruncu, C.I. and Moustabchir, H. and Dearn, K.D.
(2017)
*The industry requirements solved by fracture mechanics.*
Nova Science Publishers, Inc., pp. 1-23.

Rachadi, A. and Hamedoun, M. and El Allam, D.
(1996)
*High-temperature expansion of the correlation function and short-range ordering in a spinel lattice.*
Physica B: Condensed Matter, 222 (1-3).
pp. 160-166.

Rachid, A. and Amine, Z. and Imad, K. and Khalid, S. and Miloud, R.
(2017)
*Numerical study of natural convection in an open-ended channel with surface radiation: Comparison with experimental data.*
International Journal of Mechanical and Mechatronics Engineering, 17 (1).
pp. 23-29.

Rachidi, M. and Idrissi, B.B.
(2014)
*Proportional-integral sliding mode control for trajectory tracking and vibration control of a flexible single link manipulator.*
International Journal of Control and Automation, 7 (7).
pp. 203-216.

Rachidi, M. and Idrissi, B.B.
(2017)
*Sensorless adaptive nonlinear damping backstepping controller for doubly-fed induction machine in wind power generation.*
International Journal of Control and Automation, 10 (2).
pp. 45-62.

Rahmoun, M. and Bendada, E. and El Hassani, A. and Raïs, K.
(2000)
*Relaxable damage in hot-carrier stressing of n-MOS transistors.*
Active and Passive Electronic Components, 22 (3).
pp. 147-156.

Rahmoun, M. and El Hassani, A. and Leclerq, D. and Bendada, E.
(2000)
*Peltier effect applied to the design and realization of a new mass flow sensor.*
Active and Passive Electronic Components, 22 (3).
pp. 165-174.

Raposo, M. and Ribeiro, P.A. and Bari, N.E. and Bouchikhi, B.
(2015)
*Sensing of component traces in complex systems.*
Springer International Publishing, pp. 401-426.

Raquet, B. and Sdaq, A. and Broto, J.M. and Rakoto, H. and Ousset, J.C. and Askenazy, S. and Baudry, A. and Boyer, P. and Luche, M.C. and Khmou, A.
(1995)
*Magnetic and transport properties of Ho/Zr multilayers.*
Physica B: Physics of Condensed Matter, 211 (1-4).
pp. 335-337.

Rhattoy, A. and Bri, S. and Audhuy-Peudecederf, M.
(2005)
*Coaxial antenna for microwave hyperthermia.*
In: UNSPECIFIED.

Rhattoy, A. and Bri, S. and Audhuy-Peudecedery, M.
(2005)
*Coaxial antenna for microwave hyperthermia.*
Journal of Electromagnetic Waves and Applications, 19 (14).
pp. 1963-1971.

Rhbanou, A. and Bri, S. and Sabbane, M.
(2016)
*Design of substrate integrated waveguide band pass filter based on CSRR-EBG.*
International Journal of Microwave and Optical Technology, 11 (1).
pp. 7-14.

Rhbanou, A. and Sabbane, M. and Bri, S.
(2015)
*Design of k-band substrate integrated waveguide band-pass filter with high rejection.*
Journal of Microwaves, Optoelectronics and Electromagnetic Applications, 14 (2).
pp. 155-169.

Rmou, A. and Luquet, H. and Perotin, M. and Skouri, E.M.
(1998)
*Incidence of final states-density for impact ionization on the electron ionization rate.*
Japanese Journal of Applied Physics, Part 1: Regular Papers and Short Notes and Review Papers, 37 (11).
pp. 5880-5884.

Rougui, M. and Moussaoui, F. and Benamar, R.
(2007)
*Geometrically non-linear free and forced vibrations of simply supported circular cylindrical shells: A semi-analytical approach.*
International Journal of Non-Linear Mechanics, 42 (9).
pp. 1102-1115.

Saad, A.M. and Lahcen, H.M.
(2019)
*Distributed energy-efficient and position-aware routing protocol for heterogeneous wireless sensor network.*
Journal of Engineering Science and Technology, 14 (3).
pp. 1406-1419.

Saada, Y. and Yahiaoui, E.M. and Ouadoudi, N. and Skouri, R. and Daya, A.
(2018)
*Mathematical simulation methods to evaluate the effects of actions on conditional preventive maintenance of complex system.*
International Journal of Engineering Research in Africa, 35.
pp. 38-59.

Saber, M. and Ainane, A. and Essaoudi, I. and Bärner, K. and Gonzalez, J.
(2009)
*The critical properties of the Bax Sr1 - x TiO3 solid solution.*
Physica B: Condensed Matter, 404 (1).
pp. 31-35.

Safhi, H.M. and Frikh, B. and Hirchoua, B. and Ouhbi, B. and Khalil, I.
(2017)
*Data intelligence in the context of big data: A survey.*
Journal of Mobile Multimedia, 13 (1-2).
pp. 1-27.

Sali, A. and Fliyou, M. and Loumrhari, H.
(1997)
*Photoionization of shallow donor impurities in finite-barrier quantum-well wires.*
Physica B: Condensed Matter, 233 (2-3).
pp. 196-200.

Sanbi, M. and El Marhoune, M. and Essoufi, E.H. and Faik, L.A. and Rahmoune, M.
(2016)
*Centrifugal and thermal influence on the dispersion of surface waves propagating on a thermopiezoelectric half-space.*
International Journal of Mechanical and Mechatronics Engineering, 16 (2).
pp. 70-78.

Sanbi, M. and Essoufi, E. and Faik, L.A. and Rahmoune, M.
(2010)
*Effects of rotation and thermoelastic/pyroelectric couplings on the dispersion of acoustic surface waves in a piezothermoelastic half-space.*
In: UNSPECIFIED.

Sanbi, M. and Faik, L.A. and Rahmoune, M.
(2010)
*Thermoelastic and pyroelectric coupling effects on dynamics and active control of smart structures using finite element method with localized thermopiezoelectric elements.*
In: UNSPECIFIED.

Selmani, A. and Outanoute, M. and Alaoui, M.A. and El Khayat, M. and Guerbaoui, M. and Ed-Dahhak, A. and Lachhab, A. and Bouchikhi, B.
(2018)
*Multithreading design for an embedded irrigation system running on solar power.*
In: UNSPECIFIED.

Shafiq, A. and Hammouch, Z. and Sindhu, T.N.
(2017)
*Bioconvective MHD flow of tangent hyperbolic nanofluid with newtonian heating.*
International Journal of Mechanical Sciences, 133.
pp. 759-766.

Shtessel, Y. and Taleb, M. and Plestan, F.
(2012)
*A novel adaptive-gain supertwisting sliding mode controller: Methodology and application.*
Automatica, 48 (5).
pp. 759-769.

Sidi Ammi, M.R. and Jamiai, I.
(2018)
*Numerical analysis of some time-fractional partial differential equations for noise removal.*
International Journal of Dynamical Systems and Differential Equations, 8 (1-2).
pp. 136-149.

Sidi Ammi, M.R. and Malinowska, A.B. and Torres, D.F.M.
(2013)
*Optimal control for a steady state dead oil isotherm problem.*
Control and Cybernetics, 42 (2).
pp. 459-470.

Slassi, A. and Hammi, M. and Oumekloul, Z. and Nid-bahami, A. and Arejdal, M. and Ziat, Y. and El Rhazouani, O.
(2018)
*Effect of halogens doping on transparent conducting properties of SnO2 rutile: an ab initio investigation.*
Optical and Quantum Electronics, 50 (1).

Slimi, A. and Fitri, A. and Touimi Benjelloun, A. and Elkhattabi, S. and Benzakour, M. and Mcharfi, M. and Bouachrine, M.
(2019)
*Molecular Design of D-π-A-A Organic Dyes Based on Triphenylamine Derivatives with Various Auxiliary Acceptors for High Performance DSSCs.*
Journal of Electronic Materials, 48 (7).
pp. 4452-4462.

Sriti, M. and Agouzoul, M. and Ouazar, D. and Micheau, P.
(1997)
*Simulation numérique d'écoulement compressible dans les joints labyrinthe.*
Journal de Physique III, 7 (5).
pp. 1025-1037.

Taleb, M. and Levant, A. and Plestan, F.
(2012)
*Twisting algorithm adaptation for control of electropneumatic actuators.*
In: UNSPECIFIED.

Taleb, M. and Plestan, F.
(2012)
*Adaptive second order sliding mode control: Application to position and force control of electro-pneumatic actuators.*
In: UNSPECIFIED.

Taleb, M. and Plestan, F. and Bououlid, B.
(2013)
*High order integral sliding mode control with gain adaptation.*
In: UNSPECIFIED.

Taleb, M. and Yan, X. and Plestan, F.
(2014)
*Third order sliding mode controller based on adaptive integral sliding mode concept: Experimental application to an electropneumatic actuator.*
In: UNSPECIFIED.

Tannouche, A. and Sbai, K. and Rahmoune, M. and Agounoun, R. and Saadani, R. and Rahmani, A. and Ounejjar, Y.
(2015)
*An advanced high quality roasting approach of argan kernels based on images processing techniques.*
International Journal of Applied Engineering Research, 10 (21).
pp. 41910-41914.

Taoufik, I. and Haddad, M. and Brochu, R. and Berger, R.
(1999)
*Location of Cu2+ ions in some protoned Nasicon-type phosphates.*
Journal of Materials Science, 34 (12).
pp. 2943-2947.

Taraf, M. and Ghanameh, M.F. and Mliha Touati, M. and Oussouaddi, O. and Zeghloul, A.
(2005)
*Numerical simulation of material sub-surface defects in rolling contact fatigue.*
In: UNSPECIFIED.

Taraf, M. and Zahaf, E.H. and Oussouaddi, O. and Zeghloul, A.
(2010)
*Numerical analysis for predicting the rolling contact fatigue crack initiation in a railway wheel steel.*
Tribology International, 43 (3).
pp. 585-593.

Tarla, L.B. and Bakhti, M. and Idrissi, B.B.
(2018)
*Finite-time sliding mode observer for uncertain nonlinear flexible manipulators with unknown disturbance.*
International Review of Mechanical Engineering, 12 (11).
pp. 869-875.

Teidj, S.
(2019)
*Detection of transverse defect in a railhead based on guided waves generated by radiation laser.*
International Review of Mechanical Engineering, 13 (6).
pp. 332-339.

Torrisi, L. and Cuttone, G. and Kaidi, M. and Gentile, C. and Makhtari, A. and Della Mea, G. and Quaranta, A. and Rigato, V.
(1997)
*Titanium nitride insulation for the deflector of superconducting cyclotrons.*
IEEE Transactions on Dielectrics and Electrical Insulation, 4 (3).
pp. 300-305.

Touili, S. and Alami Merrouni, A. and El Hassouani, Y. and Bennouna, E.G. and Ghennioui, A. and Amrani, A.-I.
(2019)
*A comparative study on hydrogen production from small-scale PV and CSP systems.*
Lecture Notes in Electrical Engineering, 519.
pp. 723-730.

Tounzi, A. and Henneron, T. and Le Menach, Y. and Askour, R. and Dumetz, E. and Piriou, F.
(2004)
*3-D approaches to determine the end winding inductances of a permanent-magnet linear synchronous motor.*
IEEE Transactions on Magnetics, 40 (2 II).
pp. 758-761.

Touzani Qriouet, M. and Mira, C.
(2000)
*Reducible fractional harmonics generated by the nonautonomous Duffing-Rayleigh equation. Pockets of reducible harmonics and Arnold's tongues.*
International Journal of Bifurcation and Chaos in Applied Sciences and Engineering, 10 (6).
pp. 1345-1366.

Tsouli, A. and Boutoulout, A.
(2016)
*Controllability of the Parabolic System Via Bilinear Control.*
Journal of Dynamical and Control Systems, 22 (1).
pp. 35-44.

Tsouli, A. and El Houch, A.
(2019)
*Exponential and weak stabilization for distributed bilinear systems with time delay via bounded feedback control.*
Asian Journal of Control.

Yaakoubi, A. and Chahlaoui, A. and Rahmani, M. and Elyachioui, M. and Nejdi, I.
(2010)
*Effect of olive mill wastewater spreading on the physicochemical characteristics of soil.*
Desalination and Water Treatment, 16 (1-3).
pp. 194-200.

Yacine, E.A. and Essahlaoui, A. and Oudija, F. and Mimich, K. and Nassiri, L.
(2019)
*Assessment of soil erosion by (RUSLE) using remote sensing and GIS case of watershed of Beht in upstream of Ouljat Sultan dam (Morocco).*
ARPN Journal of Engineering and Applied Sciences, 14 (9).
pp. 1765-1776.

Youssef, E.A. and Mustapha, J. and Tarik, K.
(2018)
*Towards controlling climatic parameters under greenhouse.*
In: UNSPECIFIED.

Zaakri, S. and Zenkouar, L. and Bri, S.
(2013)
*Conception of Bi-band rectangular microstrip array antenna.*
Journal of Microwaves, Optoelectronics and Electromagnetic Applications, 12 (1).
fp23-fp36.

Zahir, J. and El Qadi, A.
(2016)
*A recommendation system for execution plans using machine learning.*
Mathematical and Computational Applications, 21 (2).

Zaim, A. and Kerouad, M. and Belmamoun, Y.
(2009)
*Monte Carlo study of a mixed spin-frac(1, 2) and spin-1 Blume-Capel ferrimagnetic model with four-spin interaction.*
Physica B: Condensed Matter, 404 (16).
pp. 2280-2284.

Zaim, N. and Zaim, A. and Kerouad, M.
(2016)
*Monte Carlo study of the random magnetic field effect on the phase diagrams of a spin-1 cylindrical nanowire.*
Journal of Alloys and Compounds, 663.
pp. 516-523.

Zemmouri, E.M. and Behja, H. and Ouhbi, B. and Trousse, B. and Marzak, A. and Benghabrit, Y.
(2014)
*Goal driven approach to model interaction between viewpoints of a multi-view KDD process.*
Journal of Mobile Multimedia, 9 (3-4).
pp. 214-229.

Zenasni, Z. and Haterbouch, M. and Atmani, Z. and Atlati, S. and Zenasni, M. and Nasri, K. and Oussouaddi, O.
(2019)
*Physics-based plasticity model incorporating microstructure changes for severe plastic deformation.*
Comptes Rendus - Mecanique, 347 (8).
pp. 601-614.

Zenkouar, H. and Nachit, A.
(1997)
*Images compression using moments method of orthogonal polynomials.*
Materials Science and Engineering B, 49 (3).
pp. 211-215.

Zerouali, A. and Karim, B. and Chakrone, O.
(2018)
*Nonlinear Steklov eigenvalue problem with variable exponents and without Ambrosetti–Rabinowitz condition.*
International Journal of Dynamical Systems and Differential Equations, 8 (1-2).
pp. 113-122.

Zerrik, E. and Badraoui, L. and El Jai, A.
(1999)
*Sensors and regional boundary state reconstruction of parabolic systems.*
Sensors and Actuators, A: Physical, 75 (2).
pp. 102-117.

Zerrik, E. and Benhadid, S. and Bourray, H.
(2007)
*Sensors and regional observability of the wave equation.*
Sensors and Actuators, A: Physical, 138 (2).
pp. 313-328.

Zerrik, E. and Bourray, H.
(2003)
*Flux reconstruction: Sensors and simulations.*
Sensors and Actuators, A: Physical, 109 (1-2).
pp. 34-46.

Zerrik, E. and Bourray, H. and El Jai, A.
(2004)
*Regional observability for semilinear distributed parabolic systems.*
Journal of Dynamical and Control Systems, 10 (3).
pp. 413-430.

Zerrik, E. and Boutoulout, A. and Bourray, H.
(2001)
*Boundary strategic actuators.*
Sensors and Actuators, A: Physical, 94 (3).
pp. 197-203.

Zerrik, E. and Ghafrani, F.
(2002)
*Minimum energy control subject to output constraints: Numerical approach.*
IEE Proceedings: Control Theory and Applications, 149 (1).
pp. 105-110.

Zerrik, E. and Ghafrani, F.
(2003)
*Regional gradient-constrained control problem. Approaches and simulations.*
Journal of Dynamical and Control Systems, 9 (4).
pp. 585-599.

Zerrik, E. and Kamal, A.
(2005)
*Flux target: Actuators and simulations.*
Sensors and Actuators, A: Physical, 121 (1).
pp. 22-30.

Zerrik, E. and Kamal, A.
(2007)
*Output controllability for semi-linear distributed parabolic systems.*
Journal of Dynamical and Control Systems, 13 (2).
pp. 289-306.

Zerrik, E. and Kamal, A. and Boutoulout, A.
(2002)
*Regional flux target with minimum energy.*
IEE Proceedings: Control Theory and Applications, 149 (4).
pp. 349-356.

Zerrik, E. and Larhrissi, R.
(2002)
*Regional boundary controllability of hyperbolic systems. Numerical approach.*
Journal of Dynamical and Control Systems, 8 (3).
pp. 293-311.

Zerrik, E. and Ouzahra, M. and Ztot, K.
(2004)
*Regional stabilisation for infinite bilinear systems.*
IEE Proceedings: Control Theory and Applications, 151 (1).
pp. 109-116.

Zerrik, E.H. and Aadi, A.A. and Larhrissi, R.
(2017)
*Regional stabilization for a class of bilinear systems.*
IFAC-PapersOnLine, 50 (1).
pp. 4540-4545.

Zerrik, E.H. and Ait Aadi, A. and Larhrissi, R.
(2019)
*On the output feedback stabilization for distributed semilinear systems.*
Asian Journal of Control.

Zerrik, E.H. and El Boukhari, N.
(2018)
*Regional constrained control problem for a class of semilinear distributed systems.*
Control Theory and Technology, 16 (3).
pp. 221-231.

Zerrik, E.H. and Ezzaki, L.
(2017)
*Regional Gradient Stabilization of Semilinear Distributed Systems.*
Journal of Dynamical and Control Systems, 23 (2).
pp. 405-420.

Zerrik, E.H. and Ezzaki, L.
(2019)
*An output stabilization of infinite dimensional semilinear systems.*
IMA Journal of Mathematical Control and Information, 36 (1).
pp. 101-123.

Zerrik, E.H. and Kabouss, A.E.
(2017)
*Regional optimal control of a class of bilinear systems.*
IMA Journal of Mathematical Control and Information, 34 (4).
pp. 1157-1175.

Zerrik, E.H. and Ould Sidi, M.
(2010)
*An output controllability of bilinear distributed system.*
International Review of Automatic Control, 3 (5).
pp. 466-473.

Zitane, H. and Larhrissi, R. and Boutoulout, A.
(2019)
*Riemann liouville fractional spatial derivative stabilization of bilinear distributed systems.*
Journal of Applied Nonlinear Dynamics, 8 (3).
pp. 447-461.

Zoubir, A. and Agounoun, R. and Kadiri, I. and Sbai, K. and Rahmoune, M.
(2016)
*Experimental study of the intensification of heat transfer by pool boiling LN2: Application to cooling of a brass ribbon in horizontal position.*
Frontiers in Heat and Mass Transfer, 7 (1).

Zouine, Y. and Madini, Z. and Aloui, K.S. and Foshi, J.
(2017)
*DS-OCDMA/WDM receivers based on parallel interference cancellation for gigabit passive optical network.*
International Journal of Microwave and Optical Technology, 12 (3).
pp. 213-220.

Zouine, Y. and Madini, Z. and Aloui, K.S. and Foshi, J.
(2016)
*Performance analysis of parallel interference cancellation receiver applied to hybrid OCDMA/WDM System for high-speed optical access.*
In: UNSPECIFIED.

Zouiten, H. and Boutoulout, A. and El Alaoui, F.-Z.
(2019)
*Regional observability with constraints on the state of semilinear parabolic systems.*
Discontinuity, Nonlinearity, and Complexity, 8 (2).
pp. 211-223.

Zouiten, H. and El Alaoui, F.Z. and Boutoulout, A.
(2015)
*Regional boundary observability with constraints: A numerical approach.*
International Review of Automatic Control, 8 (5).
pp. 354-361.