Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | B | C | D | E | F | G | H | I | J | K | M | O | R | S | T | U | Z
Number of items at this level: 99.

A

Abdelkader, S.A.A. and Fergani, F. and Bentaleb, M. and Boutahir, M. and Fakrach, B. and Chadli, H. and Rahmani, A. (2017) Trivacancy defects and their effects on the electronic and vibrational properties of single-walled carbon nanotubes. In: UNSPECIFIED.

Agrouaz, Y. and Bouhal, T. and Jamil, A. and Msaad, A.A. and Kousksou, T. and Mahdaoui, M. and Rhafiki, T.E. (2016) Effect of inclined wavy surface on heat transfer inside a rectangular cavity: Solar applications. In: UNSPECIFIED.

Ahmed, A. and Tarik, K. and Youssef, Z. and Amine, A. and Tarik, E.R. (2014) Thermal behavior of PCM building material under periodic convection boundary conditions. In: UNSPECIFIED.

Ajdad, H. and Benyakhlef, S. and Al Mers, A. and Bouatem, A. and Boutammacht, A.N. and El ALj, S. and Merroun, O. (2014) Heat transfer analysis of a cylindrical receiver for a linear Fresnel System. In: UNSPECIFIED.

Ajdad, H. and Boutammachte, N. and Al Mers, A. and Bouatem, A. and Merroun, O. (2014) Heat transfer model of a trough compound parabolic reflector used in a linear Fresnel solar field. In: UNSPECIFIED.

Al Mers, A. and Azzabakh, A. and Mimet, A. and El Kalkha, H. (2006) Optimal design study of cylindrical finned reactor for solar adsorption cooling machine working with activated carbon-ammonia pair. Applied Thermal Engineering, 26 (16). pp. 1866-1875.

Al Mers, A. and Boutammachte, N. and Bouatem, A. (2013) Performance analysis of solar adsorption cooling machine using fined tubular reactor. In: UNSPECIFIED.

Al Mers, A. and El Alj, S. and Ajdad, H. and Benyakhlef, S. and Bouatem, A. and Boutammacht, N. and Merroun, O. (2014) Preliminary Monte-Carlo Ray Tracing code for modeling linear Fresnel systems. In: UNSPECIFIED.

Alami, M.E. and Habibi, M. and Bri, S. (2016) The modeling of maximum power point tracking controller for increasing efficiency of solar power system. In: UNSPECIFIED.

Allouch, M. and Alami, M. and Boukhlifi, F. (2016) Production of fuel friquettes from acorn shells and acorn cups. In: UNSPECIFIED.

Allouhi, A. and Saadani, R. and Buker, M.S. and Kousksou, T. and Jamil, A. and Rahmoune, M. (2019) Energetic, economic and environmental (3E) analyses and LCOE estimation of three technologies of PV grid-connected systems under different climates. Solar Energy, 178. pp. 25-36.

Arbaoui, A. and Bennini, M.A. and Asbik, M. (2013) Towards a knowledge base for a wind electric pumping system design. In: UNSPECIFIED.

Arramach, J. and Boutammachte, N.-E. and Almers, A. and Bouatem, A. (2016) Viscous-inviscid interaction technique for prediction of aerodynamic characteristics of HAWT blade S809 airfoil. In: UNSPECIFIED.

Askour, R. and Idrissi, B.B. (2014) DSP-based sensorless speed control of a permanent magnet synchronous motor using sliding mode current observer. International Journal of Power Electronics and Drive Systems, 4 (3). pp. 281-289.

B

Bakkas, M. and Amahmid, A. and Hasnaoui, M. (2008) Numerical study of natural convection heat transfer in a horizontal channel provided with rectangular blocks releasing uniform heat flux and mounted on its lower wall. Energy Conversion and Management, 49 (10). pp. 2757-2766.

Bakkas, M. and Amahmid, A. and Hasnaoui, M. (2006) Steady natural convection in a horizontal channel containing heated rectangular blocks periodically mounted on its lower wall. Energy Conversion and Management, 47 (5). pp. 509-528.

Bakkas, M. and Hasnaoui, M. and Amahmid, A. (2010) Natural convective flows in a horizontal channel provided with heating isothermal blocks: Effect of the inter blocks spacing. Energy Conversion and Management, 51 (2). pp. 296-304.

Bejjit, L. and Haddad, M. (2002) EPR study, in the normal and superconducting states, of GdBa2Cu3O7 single crystal before and after grinding. Physica C: Superconductivity and its Applications, 371 (4). pp. 339-343.

Bennis, G. and Karim, M. and Lagrioui, A. (2016) Optimization of the performance of a photovoltaic system with MPPT controller. In: UNSPECIFIED.

Benomar, W. and Zennouhi, H. and Arid, A. and Rhafiki, T.E. and Msaad, A.A. and Kousksou, T. (2016) Storage of solar energy in PCM building construction. In: UNSPECIFIED.

Benyakhlef, S. and Al Mers, A. and Bouatem, A. and Boutammachte, N. and Merroun, O. (2014) Verification & validation of simulation code for Linear Fresnel systems. In: UNSPECIFIED.

Benyakhlef, S. and Mers, A.A. and Bouatem, A. and Boutammachte, N. and Merroun, O. (2016) Performance analysis of a Parabolic Linear Fresnel system. In: UNSPECIFIED.

Bouatem, A. and Almers, A. and Boutammachte, N. (2013) Load evaluation of horizontal-axis wind turbine rotor using coupled Beddoes near-wake model and free-wake method. International Journal of Energy and Environmental Engineering, 4 (1). pp. 1-11.

Bouderbala, M. and Bossoufi, B. and Aroussi, H.A. and Lagrioui, A. and Taoussi, M. and Ihedrane, Y. and Ghamrasni, M.E. (2018) Modeling and power controls of wind energy conversion systems based on doubly fed induction generator. In: UNSPECIFIED.

Bouhal, T. and Agrouaz, Y. and Allouhi, A. and Kousksou, T. and Jamil, A. and El Rhafiki, T. and Zeraouli, Y. (2017) Impact of load profile and collector technology on the fractional savings of solar domestic water heaters under various climatic conditions. International Journal of Hydrogen Energy, 42 (18). pp. 13245-13258.

Bouhal, T. and Agrouaz, Y. and Jamil, A. and Msaad, A.A. and Kousksou, T. and Arid, A. (2016) Heat transfer inside cavities heated by discrete sources: Solar systems. In: UNSPECIFIED.

Bouhou, S. and Hamri, M.E. and Essaoudi, I. and Ainane, A. and Ahuja, R. (2018) A theoretical study of hysteresis behaviors of 2D mixed spin-(L/2,L)Ising nanopaticles. In: UNSPECIFIED.

Boutahir, M. and Abdelkader, S.A.A. and Rahmani, A. and Fakrach, B. and Chadli, H. and Rahmani, A. (2017) Vibrational study of hybrid systems based on graphene for solar cells. In: UNSPECIFIED.

Boutahir, M. and El Majdoub, S. and Rahmani, A. and Fakrach, B. and Chadli, H. and Rahmani, A. (2017) Electronic properties of phosphorene nanoribbons. In: UNSPECIFIED.

Boutahir, M. and Rahmani, A. and Chadli, H. and Rahmani, A. (2016) Electronic and vibrational properties of dimer of single-wall carbon nanotubes. In: UNSPECIFIED.

Boutahir, M. and Rahmani, A.H. and Fakrach, B. and Chadli, H. and Rahmani, A. (2016) Theoretical study of electronic and vibrational properties of dimer of single-wall carbon nanotubes. International Journal of Hydrogen Energy, 41 (45). pp. 20874-20879.

Boutammachte, N. and Knorr, J. (2012) Field-test of a solar low delta-T Stirling engine. Solar Energy, 86 (6). pp. 1849-1856.

C

Chaibi, Y. and Allouhi, A. and Salhi, M. and El-jouni, A. (2019) Annual performance analysis of different maximum power point tracking techniques used in photovoltaic systems. Protection and Control of Modern Power Systems, 4 (1).

Chaibi, Y. and Malvoni, M. and Chouder, A. and Boussetta, M. and Salhi, M. (2019) Simple and efficient approach to detect and diagnose electrical faults and partial shading in photovoltaic systems. Energy Conversion and Management, 196. pp. 330-343.

Chaibi, Y. and Salhi, M. and El-jouni, A. and Essadki, A. (2018) A new method to extract the equivalent circuit parameters of a photovoltaic panel. Solar Energy, 163. pp. 376-386.

Charhouni, N. and Arbaoui, A. and Sallaou, M. (2014) Analysis of wake impact on wind farm performance using two analytical models. In: UNSPECIFIED.

Charhouni, N. and Sallaou, M. and Mansouri, K. (2019) Realistic wind farm design layout optimization with different wind turbines types. International Journal of Energy and Environmental Engineering, 10 (3). pp. 307-318.

D

Dlimi, M. and Iken, O. and Agounoun, R. and Kadiri, I. and Sbai, K. (2019) Dynamic assessment of the thermal performance of hemp wool insulated external building walls according to the Moroccan climatic zoning. Journal of Energy Storage, 26.

Dlimi, M. and Iken, O. and Agounoun, R. and Zoubir, A. and Kadiri, I. and Sbai, K. (2019) Energy performance and thickness optimization of hemp wool insulation and air cavity layers integrated in Moroccan building walls’. Sustainable Production and Consumption, 20. pp. 273-288.

E

EL Afou, Y. and Msaad, A.A. and Kousksou, T. and Mahdaoui, M. (2016) Predictive control of temperature under greenhouse using LQG strategy. In: UNSPECIFIED.

EL Afou, Y. and Msaad, A.A. and Kousksou, T. and Mahdaoui, M. (2016) Simulation of thermoelectric standard simplified model applied in a pressure cooker. In: UNSPECIFIED.

El Alami, M. and Hadlach, H. and Hajri, A. and Habibi, M. and Bri, S. (2018) Improvement and Realization of a Solar Tracker for Increasing Efficiency of Photovoltaic Energy. In: UNSPECIFIED.

El Alj, S. and Al Mers, A. and Boutammachte, N. and Bouatem, A. and Merroun, O. (2014) Modeling and simulation of a Linear Fresnel solar collector. In: UNSPECIFIED.

El Alj, S. and Al Mers, A. and Merroun, O. and Bouatem, A. and Boutammachte, N. and Ajdad, H. and Benyakhlef, S. and Filali Baba, Y. (2017) Optical modeling and analysis of the first moroccan linear fresnel solar collector prototype. Journal of Solar Energy Engineering, Transactions of the ASME, 139 (4).

El Hassani, H. and Boutammachte, N.-E. and Knorr, J. and El Hannaoui, M. (2013) Study of a low-temperature Stirling engine driven by a rhombic drive mechanism. International Journal of Energy and Environmental Engineering, 4 (1). pp. 1-11.

El Mejdoubi, A. and Chaoui, H. and Gualous, H. and Oukaour, A. and Slamani, Y. and Sabor, J. (2016) Supercapacitors state-of-health diagnosis for electric vehicle applications. In: UNSPECIFIED.

El Mejdoubi, A. and Gualous, H. and Chaoui, H. and Sabor, J. (2018) Online supercapacitors diagnosis for electric buses technologies. In: UNSPECIFIED.

El Mejdoubi, A. and Gualous, H. and Chaoui, H. and Sabor, J. (2018) Supercapacitors health prognosis for vehicular applications. In: UNSPECIFIED.

El Mghari, H. and Asbik, M. and Louahlia-Gualous, H. and Voicu, I. (2014) Condensation heat transfer enhancement in a horizontal non-circular microchannel. Applied Thermal Engineering, 64 (1-2). pp. 358-370.

El-Kaddadi, L. and Asbik, M. and Zegaoui, O. and Zari, N. and Bah, A. (2017) Experimental study of sensible heat storage/retrieval in/from a nanofluid enclosed between concentric annular tubes. In: UNSPECIFIED.

Elouali, A. and Kousksou, T. and El Rhafiki, T. and Hamdaoui, S. and Mahdaoui, M. and Allouhi, A. and Zeraouli, Y. (2019) Physical models for packed bed: Sensible heat storage systems. Journal of Energy Storage, 23. pp. 69-78.

Essalhi, Z. and Hartiti, B. and Lfakir, A. and Siadat, M. and Thevenin, P. (2014) Study of the properties of TiO2 thin films for photovoltaic application. In: UNSPECIFIED.

Ettakni, M. and Aazza, J. and Haiki, F. and Kaiba, A. and Khechoubi, M. (2017) Synthesis, Characterization, Electron Paramagnetic Resonance and UV-visible Study of Perovskite Layered System NH3-(CH2)8-NH3 2CuCl4. In: UNSPECIFIED.

ed-Dı̂n Fertahi, S. and Bouhal, T. and Rajad, O. and Kousksou, T. and Arid, A. and El Rhafiki, T. and Jamil, A. and Benbassou, A. (2018) CFD performance enhancement of a low cut-in speed current Vertical Tidal Turbine through the nested hybridization of Savonius and Darrieus. Energy Conversion and Management, 169. pp. 266-278.

F

Fahim, Z.M.E. and Aicha, Y.A. and Bouzzine, S.M. and Bouachrine, M. and Hamidi, M. (2018) Modulation on dye/TiO2 bending energy and charge transfer to high performance triphenylamine based sensitizers in solar cells: A DFT study. In: UNSPECIFIED.

G

Ghamrasm, M.E. and Mahmoudi, H. and Lagrioui, A. and Bossoufi, B. (2018) Comparison of power control methods of DFIG for wind turbines. In: UNSPECIFIED.

Ghita, B. and Mohammed, K. and Ahmed, L. (2018) Application and comparison between the conventional methods and PSO method for maximum power point extraction in photovoltaic systems under partial shading conditions. International Journal of Power Electronics and Drive Systems, 9 (2). pp. 631-640.

Ghita, B. and Mohammed, K. and Ahmed, L. (2018) Optimization the performance of a synchronization controller for a 3-phase photovoltaic grid-connected system. International Journal of Power Electronics and Drive Systems, 9 (2). pp. 622-630.

H

Hajjaj, M. and Bouaaddi, A. and Halimi, M. and Messaoudi, C. (2018) Modeling the Solar Station with the Parabolic Trough Collector Receiver. In: UNSPECIFIED.

Hajjaj, M. and Halimi, A.B.M. and Messaoudi, C. (2018) New perspective of thermal effect of a single-tank thermocline storage system for CSP plants. In: UNSPECIFIED.

Hajji, M. and Labrim, H. and Benaissa, M. and Laazizi, A. and Ez-Zahraouy, H. and Ntsoenzok, E. and Meot, J. and Benyoussef, A. (2017) Photovoltaic and thermoelectric indirect coupling for maximum solar energy exploitation. Energy Conversion and Management, 136. pp. 184-191.

Halimi, M. and Outana, I. and Diouri, J. and El Amrani, A. and Messaoudi, C. (2018) Experimental investigation of absorbed flux circumferential distribution of an absorber with U-pipe tube exchanger for Parabolic Trough Collectors. Applied Thermal Engineering, 129. pp. 1230-1239.

Halimi, M. and Outana, I. and El Amrani, A. and Diouri, J. and Messaoudi, C. (2018) Prediction of captured solar energy for different orientations and tracking modes of a PTC system: Technical feasibility study (Case study: South eastern of MOROCCO). Energy Conversion and Management, 167. pp. 21-36.

Hassouani, Y.E. and Alaoui, K.H. and Idrissi, A.E. and Hahioui, M.E. and Benami, A. (2014) Numerical simulation of the performance of dual junction a-Si:H/a-SiGe:H solar cell with AMPS-ID. In: UNSPECIFIED.

Hmina, K. and Arbaoui, A. and Sallaou, M. and Lasri, L. (2014) On the use of small wind turbine in design and innovation education. In: UNSPECIFIED.

I

Ibrahimi, M. and Arbaoui, A. and Aoura, Y. (2017) Design analysis of MVC desalination unit powered by a grid connected photovoltaic system. In: UNSPECIFIED.

Ibrahimi, M. and Arbaoui, A. and Ouzizi, L. and Aoura, Y. (2016) Embodiment design of a mechanical vapor compression desalination unit. In: UNSPECIFIED.

Iken, O. and Dlimi, M. and Agounoun, R. and Kadiri, I. and Fertahi, S.E.-D. and Zoubir, A. and Sbai, K. (2019) Numerical investigation of energy performance and cost analysis of Moroccan's building smart walls integrating vanadium dioxide. Solar Energy, 179. pp. 249-263.

Iken, O. and Fertahi, S.E.-D. and Dlimi, M. and Agounoun, R. and Kadiri, I. and Sbai, K. (2019) Thermal and energy performance investigation of a smart double skin facade integrating vanadium dioxide through CFD simulations. Energy Conversion and Management, 195. pp. 650-671.

J

Jilali, A. and Abbas, M. and Amar, M. and Zarhloule, Y. (2015) Groundwater contamination by wastewater in figuig oasis (Eastern High Atlas, Morocco). Nature Environment and Pollution Technology, 14 (2). pp. 275-282.

Jouilel, N. and Radouani, M. and El Fahime, B. (2017) Three-dimensional modeling of a horizontal axis wind turbine blade and profile effect analysis. In: UNSPECIFIED.

K

Kadi, L. and Brouri, A. (2018) Numerical Modeling of a Nonlinear Four-Phase Switched Reluctance Machine. In: UNSPECIFIED.

Koukouch, A. and Idlimam, A. and Asbik, M. and Sarh, B. and Izrar, B. and Bostyn, S. and Bah, A. and Ansari, O. and Zegaoui, O. and Amine, A. (2017) Experimental determination of the effective moisture diffusivity and activation energy during convective solar drying of olive pomace waste. Renewable Energy, 101. pp. 565-574.

M

Malika, A. and Jacques, N. and Jaafar, E.F. and Fatima, B. and Mohammed, A. (2016) Pyrolysis investigation of food wastes by TG-MS-DSC technique. Biomass Conversion and Biorefinery, 6 (2). pp. 161-172.

Malika, A. and Mohammed, A. and Guhel, Y. (2019) Energetic Combustion Characteristics and Environmental Impact of Moroccan Biomass Wastes and Their Solid Biofuel. Waste and Biomass Valorization, 10 (5). pp. 1311-1322.

Mejdoubi, A.E. and Oukaour, A. and Gualous, H. and Chaoui, H. and Sabor, J. (2016) Experimental investigation of aging calendar parameters for supercapacitors. In: UNSPECIFIED.

Mensou, S. and Essadki, A. and Minka, I. and Nasser, T. and Idrissi, B.B. (2018) Backstepping Controller for a Variable Wind Speed Energy Conversion System Based on a DFIG. In: UNSPECIFIED.

Mensou, S. and Essadki, A. and Nasser, T. and Idrissi, B.B. (2017) An efficient nonlinear Backstepping controller approach of a wind power generation system based on a DFIG. International Journal of Renewable Energy Research, 7 (4). pp. 1520-1528.

Mensou, S. and Essadki, A. and Nasser, T. and Idrissi, B.B. and Ben Tarla, L. (2020) Dspace DS1104 implementation of a robust nonlinear controller applied for DFIG driven by wind turbine. Renewable Energy, 147. pp. 1759-1771.

Merroun, O. and Al Mers, A. and Veloso, M.A. and El Bardouni, T. (2009) Developemnt and validation of sacatri code for thermal- hydraulic analysis of the CENM triga Mark II. In: UNSPECIFIED.

Merroun, O. and Al Mers, A. and Veloso, M.A. and El Bardouni, T. and El Bakkari, B. and Chakir, E. (2009) Experimental validation of the thermal-hydraulic code SACATRI. Nuclear Engineering and Design, 239 (12). pp. 2875-2884.

Merroun, O. and Almers, A. and El Bardouni, T. and El Bakkari, B. and Chakir, E. (2009) Analytical benchmarks for verification of thermal-hydraulic codes based on sub-channel approach. Nuclear Engineering and Design, 239 (4). pp. 735-748.

Mouaky, A. and Alami Merrouni, A. and Laadel, N.E. and Bennouna, E.G. (2019) Simulation and experimental validation of a parabolic trough plant for solar thermal applications under the semi-arid climate conditions. Solar Energy, 194. pp. 969-985.

O

Oabi, O. and Maaroufi, A. and Lucas, B. and Degot, S. and El Amrani, A. (2014) Composites of zinc phosphate glass/metal: New materials for thermoelectricity and solar cell devices. In: UNSPECIFIED.

Ousegui, A. and Marcos, B. and Havet, M. (2019) Inverse method to estimate air flow rate during free cooling using PCM-air heat exchanger. Applied Thermal Engineering, 146. pp. 432-439.

R

Rahmani, A. and Boutahir, M. and Fakrach, B. and Chadli, H. and Rahmani, A. (2017) Theoretical infrared phonon modes and band gap calculations of a bundle of two single walled carbon nanotubes. In: UNSPECIFIED.

Rassai, N. and Boutammachte, N. and Laazaar, K. (2018) Valorization of Moroccan olive cake in small scale burner through Stirling engine: Case study. In: UNSPECIFIED.

S

Sandabad, T. and Rachidi, M. and Dahhani, O. (2019) Assessment and control of a three-phase grid connected wind turbine. Wind Engineering.

Sellak, H. and Ouhbi, B. and Frikh, B. and Palomares, I. (2017) Towards next-generation energy planning decision-making: An expert-based framework for intelligent decision support. Renewable and Sustainable Energy Reviews, 80. pp. 1544-1577.

Selmani, A. and Ed-Dahhak, A. and Outanoute, M. and Lachhab, A. and Guerbaoui, M. and Bouchikhi, B. (2016) Performance evaluation of modelling and simulation of lead acid batteries for photovoltaic applications. International Journal of Power Electronics and Drive Systems, 7 (2). pp. 472-480.

T

Tarik, K. and Mustapha, M. and Mohamed, H. and Abdelmajid, J. and El Rhafiki, T. (2014) Heat transfer from horizontal cylinder with fins embedded in PCM. In: UNSPECIFIED.

Tarik, K. and Mustapha, M. and Mohamed, H. and Abdelmajid, J. and El Rhafiki, T. (2014) Heat transfer from multiple cylinders during melting process: Solar applications. In: UNSPECIFIED.

Tilioua, A. and Libessart, L. and Jeandel, G. and Lassue, S. (2016) Determination of radiative properties of polyester batting insulation material from hemispherical transmittance and reflectance measurements. Applied Thermal Engineering, 105. pp. 594-604.

Tilioua, A. and Libessart, L. and Lassue, S. (2018) Characterization of the thermal properties of fibrous insulation materials made from recycled textile fibers for building applications: Theoretical and experimental analyses. Applied Thermal Engineering, 142. pp. 56-67.

Touili, S. and Alami Merrouni, A. and Azouzoute, A. and El Hassouani, Y. and Amrani, A.-I. (2018) A technical and economical assessment of hydrogen production potential from solar energy in Morocco. International Journal of Hydrogen Energy, 43 (51). pp. 22777-22796.

U

Ul Haq, R. and Hammouch, Z. and Khan, W.A. (2016) Water-based squeezing flow in the presence of carbon nanotubes between two parallel disks. Thermal Science, 20 (5).

Ul Haq, R. and Hamouch, Z. and Hussain, S.T. and Mekkaoui, T. (2017) MHD mixed convection flow along a vertically heated sheet. International Journal of Hydrogen Energy, 42 (24). pp. 15925-15932.

Z

Zaimi, M. and El Achouby, H. and Ibral, A. and Assaid, E.M. and El Maliki, M.S. and Saadani, R. (2019) Temporal monitoring of temperature and incident irradiance for predicting photovoltaic solar module peak power and efficiency using analytical expressions of model physical parameters. In: UNSPECIFIED.

Zennouhi, H. and Benomar, W. and Rhafiki, T.E. and Arid, A. and Msaad, A.A. and Kousksou, T. (2016) Numerical simulation of phase change material melting in inclined enclosure. In: UNSPECIFIED.

This list was generated on Thu Nov 26 14:27:12 2020 CET.