Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | B | C | D | E | F | G | H | J | K | L | M | O | P | Q | R | S | T | U | Z
Number of items at this level: 105.

A

Abadi, S. and Aride, J. and Benkhouja, K. and Haddad, M. and Taibi, M. (2020) Spectroscopic investigation and magnetic properties of Na2Pb1−xCuxP2O7 glasses. Arabian Journal of Chemistry, 13 (1). pp. 966-973.

Aboulhassan, M.A. and El Ouarghi, H. and Ait Benichou, S. and Ait Boughrous, A. and Khalil, F. (2018) Influence of experimental parameters in the treatment of tannery wastewater by electrocoagulation. Separation Science and Technology (Philadelphia), 53 (17). pp. 2717-2726.

Agda, F. and Taleb, M. and Abram, T. and Bejjit, L. and Bouachrine, M. (2014) Materials based on carbazole for organic solar cells applications. Theoretical investigations. Physical Chemistry Research, 2 (2). pp. 244-251.

Ahusborde, E. and Amaziane, B. and El Ossmani, M. (2018) Improvement of numerical approximation of coupled multiphase multicomponent flow with reactive geochemical transport in porous media. Oil and Gas Science and Technology, 73.

Ait El Haj, B. and Bouayad, A. and Alami, M. (2018) Quantitative evaluation of shrinkage porosity in alsi9 cast alloy as function of titanium addition and casting parameters. International Journal of Mechanical and Production Engineering Research and Development, 8 (6). pp. 365-372.

Ait Lyazidi, H. and Benabdallah, M.Z. and Berlan, J. and Kot, C. and Fabre, P.-L. and Mestre, M. and Fauvarque, J.-F. (1996) Electrooxidation of Diacetone -L-Sorbose (DAS) into Diacetone-2-Keto-L-Gulonic Acid (DAG) at Nickel Electrodes. Canadian Journal of Chemical Engineering, 74 (3). pp. 405-410.

Allali, N. and Prouzet, E. and Michalowicz, A. and Gaborit, V. and Nadiri, A. and Danot, M. (1997) EXAFS identification of the active species in supported niobium sulfide hydrotreatment catalysts. Applied Catalysis A: General, 159 (1-2). pp. 333-354.

Amane, M.E. and Bouhdada, M. (2014) Synthesis and characterization of schiff base and caffeine complexes with Cd(II), Cu(II), Ni(II), Zn(II). International Journal of ChemTech Research, 6 (2). pp. 1430-1439.

Amar, H. and Benzakour, J. and Derja, A. and Villemin, D. and Moreau, B. and Braisaz, T. and Tounsi, A. (2008) Synergistic corrosion inhibition study of Armco iron in sodium chloride by piperidin-1-yl-phosphonic acid-Zn2+ system. Corrosion Science, 50 (1). pp. 124-130.

Anbri, Y. and Tijani, N. and Coronas, J. and Mateo, Ester. and Menéndez, M. and Bentama, J. (2008) Clay plane membranes: development and characterization. Desalination, 221 (1-3). pp. 419-424.

Ansari, O. and Asbik, M. and Bah, A. and Arbaoui, A. and Khmou, A. (2013) Desalination of the brackish water using a passive solar still with a heat energy storage system. Desalination, 324. pp. 10-20.

Asbik, M. and Ansari, O. and Bah, A. and Zari, N. and Mimet, A. and El-Ghetany, H. (2016) Exergy analysis of solar desalination still combined with heat storage system using phase change material (PCM). Desalination, 381. pp. 26-37.

Asbik, M. and Ansari, O. and Zeghmati, B. (2005) Numerical study of boundary layer transition in flowing film evaporation on horizontal elliptical cylinder. Heat and Mass Transfer/Waerme- und Stoffuebertragung, 41 (5). pp. 399-410.

Asbik, M. and Daif, A. and Panday, P.K. and Khmou, A. (1999) Numerical study of laminar condensation of downward flowing vapour on a single horizontal cylinder or a bank of tubes. Canadian Journal of Chemical Engineering, 77 (1). pp. 54-61.

Asnaoui, H. and Khalis, M. (2017) Determination of diffusion parameters and biosorption of cadmium in aqueous solution using algae biomass. Separation Science and Technology (Philadelphia), 52 (1). pp. 13-20.

B

Baliti, J. and Hssikou, M. and Alaoui, M. (2019) Rarefaction and external force effects on gas microflow in a lid-driven cavity. Heat Transfer - Asian Research, 48 (1). pp. 80-99.

Battace, A. and Lemhadri, M. and Zair, T. and Doucet, H. and Santelli, M. (2007) Direct arylation of thiophenes via palladium-catalysed C-H functionalisation at low catalyst loadings. Advanced Synthesis and Catalysis, 349 (16). pp. 2507-2516.

Battace, A. and Zair, T. and Doucet, H. and Santelli, M. (2006) Heck vinylations using vinyl sulfide, vinyl sulfoxide, vinyl sulfone, or vinyl sulfonate derivatives and aryl bromides catalyzed by a palladium complex derived from a tetraphosphine. Synthesis (20). pp. 3495-3505.

Belcadi, A. and Assou, M. and Affad, E. and Chatri, E. (2007) Construction of a reduced mechanism for modelling premixed combustion of methane-air. Combustion Theory and Modelling, 11 (4). pp. 603-613.

Belghiti, M.E. and Nahlé, A. and Ansari, A. and Karzazi, Y. and Tighadouini, S. and El Ouadi, Y. and Dafali, A. and Hammouti, B. and Radi, S. (2017) Inhibition effect of E and Z conformations of 2-pyridinealdazine on mild steel corrosion in phosphoric acid. Anti-Corrosion Methods and Materials, 64 (1). pp. 23-35.

Belghiti, N. and Bennani, M.N. and Bouzzine, S.M. and Hamidi, M. and Bouachrine, M. (2014) The DFT chemical investigations of optoelectronic and photovoltaic properties of short-chain conjugated molecules. Physical Chemistry Research, 2 (1). pp. 11-20.

Belhassan, A. and Chtita, S. and Lakhlifi, T. and Bouachrine, M. (2017) QSPR study of the retention/release property of odorant molecules in water using statistical methods. Orbital, 9 (4). pp. 234-247.

Benabdellah, M. and Dafali, A. and Hammouti, B. and Aouniti, A. and Rhomari, M. and Raada, A. and Senhaji, O. and Robin, J.J. (2007) The role of phosphonate derivatives on the corrosion inhibition of steel in HCI media. Chemical Engineering Communications, 194 (10). pp. 1328-1341.

Benrraou, M. and Bales, B. and Zana, R. (2003) Effect of the nature of the counterion on the interaction between cesium and tetraalkylammonium dodecylsulfates and poly(ethylene oxide) or poly(vinylpyrolidone). Journal of Colloid and Interface Science, 267 (2). pp. 519-523.

Benrraou, M. and Zana, R. (2005) Effect of alcohols on the cmc and micelle ionization degree of alkanediylα,ω-bis(dimethyldodecylammonium bromide) surfactants. Tenside, Surfactants, Detergents, 42 (3). pp. 175-179.

Bih, H. and Bih, L. and Graça, M.P.F. and Valente, M.A. and Elouadi, B. (2010) X-ray diffraction and Raman spectroscopic studies of glasses and glass- ceramics inside the A 2O-MoO 3-Nb 2O 5-P 2O 5 (A= Li, Na) systems. Eurasian Chemico-Technological Journal, 12 (3-4). pp. 207-212.

Bourass, M. and Bouachrine, M. (2019) Étude structurale des systèmes dissymétriques de structure d-π-a à base de thiénopyrazine destinés aux cellules solaires organiques de type « bulk heterojunction » (Bhj). Canadian Journal of Chemistry, 97 (10). pp. 745-755.

Bourass, M. and El Alamy, A. and Bouachrine, M. (2019) Structural and photophysical studies of triphenylamine-based nonlinear optical dyes: effects of π-linker moieties on the D-π-A structure. Comptes Rendus Chimie, 22 (5). pp. 373-385.

Bourass, M. and Komiha, N. and Kabbaj, O.K. and Wazzan, N. and Chemek, M. and Bouachrine, M. (2019) The photophysical properties and electronic structures of bis1benzothieno6,7-: D:6′,7′- d ′benzo1,2- b:4,5- b ′dithiophene (BBTBDT) derivatives as hole-transporting materials for organic light-emitting diodes (OLEDs). New Journal of Chemistry, 43 (40). pp. 15899-15909.

Bourass, M. and Touimi Benjelloun, A. and Benzakour, M. and McHarfi, M. and Jhilal, F. and Hamidi, M. and Bouachrine, M. (2017) The optoelectronic properties of organic materials based on triphenylamine that are relevant to organic solar photovoltaic cells. New Journal of Chemistry, 41 (22). pp. 13336-13346.

Bourass, M. and Touimi Benjelloun, A. and Benzakour, M. and Mcharfi, M. and Hamidi, M. and Bouzzine, S.M. and Serein-Spirau, F. and Jarrosson, T. and Sotiropoulos, J.-M. and Bouachrine, M. (2017) The optoelectronic properties of new dyes based on thienopyrazine. Comptes Rendus Chimie, 20 (5). pp. 461-466.

C

Calcagno, L. and Giorgis, F. and Makhtari, A. and Musumeci, P. and Reitano, R. (2000) Ion-beam processing of hydrogenated amorphous silicon carbide grown by plasma-enhanced chemical vapour deposition. Philosophical Magazine B: Physics of Condensed Matter; Statistical Mechanics, Electronic, Optical and Magnetic Properties, 80 (4). pp. 539-546.

Calcagno, L. and Giorgis, F. and Makthari, A. and Musumeci, P. and Pirri, F. (1999) Compositional and structural properties of deuterated plasma enhanced chemical vapour deposited silicon-carbon alloys. Philosophical Magazine B: Physics of Condensed Matter; Statistical Mechanics, Electronic, Optical and Magnetic Properties, 79 (10). pp. 1685-1694.

Charbonnier, M. and Romand, M. and Harry, E. and Alami, M. (2001) Surface plasma functionalization of polycarbonate: Application to electroless nickel and copper plating. Journal of Applied Electrochemistry, 31 (1). pp. 57-63.

Cheminet, N. and Nogueira, S.L. and Benaqqa, O. and El Malki, Z. and Bourass, M. and Cassegrain, S. and Hamidi, M. and Bouachrine, M. and Sotiropoulos, J.M. and Miqueu, K. and Jarrosson, T. and Niebel, C. and Lère-Porte, J.-P. and Serein-Spirau, F. (2019) Elaboration of low-band-gap π-conjugated systems based on thieno3,4-bpyrazines. Pure and Applied Chemistry.

Cherkaoui, M. and Khmou, A. (2001) Calculation of radiative transfer in non gris gas using narrow band model and Monte Carlo simulation. Heat and Mass Transfer/Waerme- und Stoffuebertragung, 37 (1). pp. 11-17.

Cherkaoui, M. and Khmou, A. (2001) Coupled conductive radiative transfer in CO2 with narrow band statistical model and Monte-Carlo simulation. Heat and Mass Transfer/Waerme- und Stoffuebertragung, 37 (1). pp. 27-33.

D

Dagdag, O. and El Harfi, A. and Essamri, A. and El Gouri, M. and Chraibi, S. and Assouag, M. and Benzidia, B. and Hamed, O. and Lgaz, H. and Jodeh, S. (2018) Phosphorous-based epoxy resin composition as an effective anticorrosive coating for steel. International Journal of Industrial Chemistry, 9 (3). pp. 231-240.

Daou, I. and Zegaoui, O. and Elghazouani, A. (2017) Physicochemical and photocatalytic properties of the ZnO particles synthesized by two different methods using three different precursors. Comptes Rendus Chimie, 20 (1). pp. 47-54.

Dehbi, A. and Dehmani, Y. and Omari, H. and Lammini, A. and Elazhari, K. and Abdallaoui, A. (2020) Hematite iron oxide nanoparticles (α-Fe2O3): Synthesis and modelling adsorption of malachite green. Journal of Environmental Chemical Engineering, 8 (1).

Delbrouck, J.A. and Tikad, A. and Vincent, S.P. (2018) Efficient and regioselective synthesis of γ-lactone glycosides through a novel debenzylative cyclization reaction. Chemical Communications, 54 (70). pp. 9845-9848.

Diouf, A. and Motia, S. and El Alami El Hassani, N. and El Bari, N. and Bouchikhi, B. (2017) An electrochemical biosensor based on moleculary imprinted polymer for the quantification of creatinine in human urine samples. In: UNSPECIFIED.

Doi, T. and Santos, A. and Tij, M. (1999) Numerical study of the influence of gravity on the heat conductivity on the basis of kinetic theory. Physics of Fluids, 11 (11). pp. 3553-3559.

E

El Alamy, A. and Amine, A. and Bouachrine, M. (2017) DFT study of electronic and optical properties of small oligothiophenes based on terthiophene end-capped by several donor groups. Orbital, 9 (3). pp. 188-196.

El Amane, M. and El Hamdani, H. (2014) Synthesis and characterization of caffeine and phenanthroline complexes M(phen)(caf)2X2 M = Ni(II),Cu(ii),Zn(II),Cd(II), X=SCN-,CN-, caf: Caffeine, phen: (1,10)-phenanthroline. International Journal of ChemTech Research, 6 (1). pp. 465-473.

El Haj, B.A. and Bouayad, A. and Alami, M. (2015) A comparison between numerical simulation and experimental determination of porosity. Lecture Notes in Mechanical Engineering, 789. pp. 297-303.

El Mzioui, S. and Bouzzine, S.M. and Bouachrine, M. and Bennan, M.N. and Hamidi, M. (2017) Effect of the alkyl chain length incorporated into donor part on the optoelectronic properties of the carbazole based dyes: Theoretical study. Orbital, 9 (5). pp. 329-336.

El Mzioui, S. and Bouzzine, S.M. and Sidir, İ. and Bouachrine, M. and Bennani, M.N. and Bourass, M. and Hamidi, M. (2019) Theoretical investigation on π-spacer effect of the D–π–A organic dyes for dye-sensitized solar cell applications: a DFT and TD-BHandH study. Journal of Molecular Modeling, 25 (4).

ElKhattabi, S. and Hachi, M. and Fitri, A. and Benjelloun, A.T. and Benzakour, M. and Mcharfi, M. and Bouachrine, M. (2019) Theoretical study of the effects of modifying the structures of organic dyes based on N,N-alkylamine on their efficiencies as DSSC sensitizers. Journal of Molecular Modeling, 25 (1).

Essajai, R. and Benhouria, Y. and Rachadi, A. and Qjani, M. and Mzerd, A. and Hassanain, N. (2019) Shape-dependent structural and magnetic properties of Fe nanoparticles studied through simulation methods. RSC Advances, 9 (38). pp. 22057-22063.

F

Fahim, Z.M.E. and Hamidi, M.M. and Bouzzine, S.M. and Hamidi, M. (2018) Investigations of the bridged thiophene derivative effect on the performance of N,N-diethylaniline-based compounds for organic photovoltaic cells. Orbital, 10 (2). pp. 83-91.

G

Gaborit, V. and Allali, N. and Geantet, C. and Breysse, M. and Vrinat, M. and Danot, M. (2000) Niobium sulfide as a dopant for hydrotreating NiMo catalysts. Catalysis Today, 57 (3-4). pp. 267-273.

Ghaleb, A. and Aouidate, A. and Sba, A. and Lakhlifi, T. and Maghat, H. and Bouachrine, M. (2017) Theoretical study of 1,3-dipolar cycloadditions regioselectivity of benzyl azide with glycosyl-o acetylene using density functional theory (DFT). Orbital, 9 (5). pp. 337-343.

Ghoulam, M.B. and Moatadid, N. and Graciaa, A. and Lachaise, J. and Marion, G. and Schechter, R.S. (1998) Demixing in ternary mixed micelles. Journal of Colloid and Interface Science, 200 (1). pp. 74-80.

H

Haddi, Z. and El Barbri, N. and Tahri, K. and Bougrini, M. and El Bari, N. and Llobet, E. and Bouchikhi, B. (2015) Instrumental assessment of red meat origins and their storage time using electronic sensing systems. Analytical Methods, 7 (12). pp. 5193-5203.

Hafidi, E. and El Omari, M. and El Omari, M. and Bentayeb, A. and Bennazha, J. and El Maadi, A. and Chehbouni, M. (2013) Conductivity studies of some diphosphates with the general formula AI2BIIP2O7 by impedance spectroscopy. Arabian Journal of Chemistry, 6 (3). pp. 253-263.

Hamidi-Alaoui, Z. and Moussa, N. and Elalaoui, A.E. (2016) A comparative study of IPv6-based protocols for mobile wireless sensor networks. Contemporary Engineering Sciences, 9 (21). pp. 1043-1056.

J

Jilali, B. and Mustapha, O. (2018) Rainfed agriculture in the face of climate change: Morocco case L’agriculture pluviale face aux changements climatiques: le cas du Maroc. Eau, l'Industrie, les Nuisances (413). pp. 91-96.

K

Khadiri, A. and Saddik, R. and Bekkouche, K. and Aouniti, A. and Hammouti, B. and Benchat, N. and Bouachrine, M. and Solmaz, R. (2016) Gravimetric, electrochemical and quantum chemical studies of some pyridazine derivatives as corrosion inhibitors for mild steel in 1 M HCl solution. Journal of the Taiwan Institute of Chemical Engineers, 58. pp. 552-564.

Kharchouf, S. and Majidi, L. and Bouklah, M. and Hammouti, B. and Bouyanzer, A. and Aouniti, A. (2014) Effect of three 2-allyl-p-mentha-6,8-dien-2-ols on inhibition of mild steel corrosion in 1M HCl. Arabian Journal of Chemistry, 7 (5). pp. 680-686.

Kouamé, N.A. and Alaoui, O.T. and Herissan, A. and Larios, E. and José-Yacaman, M. and Etcheberry, A. and Colbeau-Justin, C. and Remita, H. (2015) Visible light-induced photocatalytic activity of modified titanium(IV) oxide with zero-valent bismuth clusters. New Journal of Chemistry, 39 (3). pp. 2316-2322.

Kousksou, T. and Mahdaoui, M. and Hlimi, M. and El Alaiji, R. and El Rhafiki, T. (2016) Latent energy storage: Melting process around heating cylinders. Case Studies in Thermal Engineering, 8. pp. 128-140.

L

Lahjouji, I. and El Gadari, M. and El Fahime, B. and Radouani, M. (2017) Effect of relative velocity between rough surfaces: Hydrodynamic lubrication of rotary lip seal. International Journal of Applied Mechanics and Engineering, 22 (2). pp. 321-332.

Lahsaini, M. and Zenkouar, L. and Bri, S. (2013) Broadband impedance matching techniques for microwave amplifiers 10-12 GHz. International Review on Modelling and Simulations, 6 (3). pp. 953-961.

Lahsaini, M. and Zenkouar, L. and Bri, S. (2013) Design of broadband low noise amplifier based on HEMT transistors in the X-band. International Journal of Engineering and Technology, 5 (1). pp. 468-476.

Larif, M. and Adad, A. and Hmammouchi, R. and Taghki, A.I. and Soulaymani, A. and Elmidaoui, A. and Bouachrine, M. and Lakhlifi, T. (2017) Biological activities of triazine derivatives. Combining DFT and QSAR results. Arabian Journal of Chemistry, 10. S946-S955.

Lemhadri, M. and Battace, A. and Berthiol, F. and Zair, T. and Doucet, H. and Santelli, M. (2008) Palladium-tetraphosphine complex catalysed heck reaction of vinyl bromides with alkenes: A powerful access to conjugated dienes. Synthesis (7). pp. 1142-1152.

M

Makhtari, A. and Raineri, V. and Calcagno, L. and La Via, F. and Frisina, F. and Foti, G. (2000) Enhanced oxidation of ion-damaged 6H-SiC. Philosophical Magazine B: Physics of Condensed Matter; Statistical Mechanics, Electronic, Optical and Magnetic Properties, 80 (4). pp. 661-667.

Makhtari, A. and Raineri, V. and Calcagno, L. and La Via, F. and Frisina, F. and Foti, G. (2000) Enhanced oxidation of ion-damaged 6H-SiC. Philosophical Magazine B: Physics of Condensed Matter; Statistical Mechanics, Electronic, Optical and Magnetic Properties, 80 (4). pp. 661-667.

Martínez de Ilarduya, A. and Ittobane, N. and Bermúdez, M. and Alla, A. and El Idrissi, M. and Muñoz-Guerra, S. (2002) Poly(α-alkyl γ-glutamate)s of microbial origin. 2. On the microstructure and crystal structure of poly(α-ethyl γ-glutamate)s. Biomacromolecules, 3 (5). pp. 1078-1086.

Mekrini, Z. and Bri, S. (2016) Performance of an indirect field-oriented control for asynchronous machine. International Journal of Engineering and Technology, 8 (2). pp. 726-733.

Mers, A.A. and Mimet, A. (2005) Numerical study of heat and mass transfer in adsorption porous medium heated by solar energy: Boubnov-Galerkin method. Heat and Mass Transfer/Waerme- und Stoffuebertragung, 41 (8). pp. 717-723.

Mkhida, A. and Thiriet, J.-M. and Aubry, J.-F. (2014) Integration of intelligent sensors in Safety Instrumented Systems (SIS). Process Safety and Environmental Protection, 92 (2). pp. 142-149.

Msaad, A.A. and Mahdaoui, M. and Kousksou, T. and Allouhi, A. and El Rhafiki, T. and Jamil, A. and Ouazzani, K. (2017) Numerical simulation of thermal chaotic mixing in multiple rods rotating mixer. Case Studies in Thermal Engineering, 10. pp. 388-398.

Musumeci, P. and Reitano, R. and Calcagno, L. and Roccaforte, F. and Makhtari, A. and Grimaldi, M.G. (1997) Relaxation and crystallization of amorphous silicon carbide probed by optical measurements. Philosophical Magazine B: Physics of Condensed Matter; Statistical Mechanics, Electronic, Optical and Magnetic Properties, 76 (3). pp. 323-333.

O

Oubenmoh, S. and Allouhi, A. and Ait Mssad, A. and Saadani, R. and Kousksou, T. and Rahmoune, M. and Bentaleb, M. (2018) Some particular design considerations for optimum utilization of under floor heating systems. Case Studies in Thermal Engineering, 12. pp. 423-432.

P

Perrichon, V. and Laachir, A. and Abouarnadasse, S. and Touret, O. and Blanchard, G. (1995) Thermal stability of a high surface area ceria under reducing atmosphere. Applied Catalysis A, General, 129 (1). pp. 69-82.

Páramo, R. and Zouine, M. and Casanova, C. (2002) New batch cells adapted to measure saturated heat capacities of liquids. Journal of Chemical and Engineering Data, 47 (3). pp. 441-448.

Páramo, R. and Zouine, M. and Sobrón, F. and Casanova, C. (2004) Oxygenated gasoline additives: Saturated heat capacities between (277 and 355) K. Journal of Chemical and Engineering Data, 49 (1). pp. 58-61.

Páramo, R. and Zouine, M. and Sobrón, F. and Casanova, C. (2006) Saturated heat capacities of some linear and branched alkylbenzenes between (332 and 401) K. Journal of Chemical and Engineering Data, 51 (1). pp. 123-126.

Q

Qafssaoui, F. and Poirier, J. and Ildefonse, J.P. and Hubert, P. and Benyaïch, F. (2005) Microstructural and physicochemical studies of corroded high-alumina refractories. Silicates Industriels, 70 (7-8). pp. 109-117.

R

Rahmani, A.H. and Boutahir, M. and ElBiyaali, A. and Fakrach, B. and Chadli, H. and Sbai, K. and Hermet, P. and Bantignies, J.-L. and Rahmani, A. (2016) Theoretical infrared phonon modes in double-walled carbon nanotubes. RSC Advances, 6 (47). pp. 41025-41031.

Rassai, N. and Boutammachte, N. and El Hassani, H. and Almers, A. and Boudi, E.M. and Bekraoui, A. (2018) Effect of the particle size of pulverized olive cake on combustion parameters in Stirling engine in Morocco. Case Studies in Thermal Engineering, 12. pp. 433-444.

Rhbanou, A. and Bri, S. (2014) Design of substrate integrated waveguide pass filter at 33-75 GHz band. International Journal of Engineering and Technology, 6 (6). pp. 2815-2825.

Riouch, T. and El-Bachtiri, R. and Salhi, M. (2013) Robust sliding mode control for smoothing the output power of DFIG Under Fault Grid. International Review on Modelling and Simulations, 6 (4). pp. 1264-1270.

S

Sadiki, Y.A. and Hamidi, M. and Bouzzine, S.M. and Bejjit, L. and Haddad, M. and Bouachrine, M. (2013) Quantum chemical investigations of new conjugated compounds based on dithiobithiophene as solar cells materials. Latin American Applied Research, 43 (4). pp. 369-376.

Saidi, T. and Welearegay, T.G. and Zaim, O. and Leon, O.G. and Ionescu, R. and El Bari, N. and Bouchikhi, B. (2017) Ability of discrimination of breath from smoker and non-smoker volunteers by using an electronic nose based on WO3 nanowires and SnO2 sensors. In: UNSPECIFIED.

Salbi, A. and Bri, S. (2014) Conception of electro-stimulation system. International Journal of Engineering and Technology, 6 (5). pp. 2136-2143.

Schneider, D. and Liaqat, F. and El Boudouti, E.H. and El Hassouani, Y. and Djafari-Rouhani, B. and Tremel, W. and Butt, H.-J. and Fytas, G. (2012) Engineering the hypersonic phononic band gap of hybrid bragg stacks. Nano Letters, 12 (6). pp. 3101-3108.

Shafiq, A. and Hammouch, Z. and Turab, A. (2018) Impact of radiation in a stagnation point flow of Walters’ B fluid towards a Riga plate. Thermal Science and Engineering Progress, 6. pp. 27-33.

T

Tahiri Alaoui, O. and Herissan, A. and Le Quoc, C. and Zekri, M.E.M. and Sorgues, S. and Remita, H. and Colbeau-Justin, C. (2012) Elaboration, charge-carrier lifetimes and activity of Pd-TiO 2 photocatalysts obtained by gamma radiolysis. Journal of Photochemistry and Photobiology A: Chemistry, 242. pp. 34-43.

Tahri, K. and Tiebe, C. and Bougrini, M. and Saidi, T. and El Alami El Hassani, N. and El Bari, N. and Hübert, T. and Bouchikhi, B. (2015) Characterization and discrimination of saffron by multisensory systems, SPME-GC-MS and UV-Vis spectrophotometry. Analytical Methods, 7 (24). pp. 10328-10338.

Tahri, K. and Tiebe, C. and El Bari, N. and Hübert, T. and Bouchikhi, B. (2016) Geographical provenience differentiation and adulteration detection of cumin by means of electronic sensing systems and SPME-GC-MS in combination with different chemometric approaches. Analytical Methods, 8 (42). pp. 7638-7649.

Taleb, M. and Plestan, F. and Bououlid, B. (2015) An adaptive solution for robust control based on integral high-order sliding mode concept. International Journal of Robust and Nonlinear Control, 25 (8). pp. 1201-1213.

Tarla, L.B. and Bakhti, M. and Idrissi, B.B. (2016) Flexible manipulator state reconstruction using luenberger and first order sliding mode observers under parametric uncertainties. International Review on Modelling and Simulations, 9 (6). pp. 427-434.

Tij, M. and Garzó, V. and Santos, A. (1999) Influence of gravity on nonlinear transport in the planar Couette flow. Physics of Fluids, 11 (4). pp. 893-904.

Tij, M. and Santos, A. (1995) Combined heat and momentum transport in a dilute gas. Physics of Fluids, 7 (11). pp. 2858-2866.

U

Ul Haq, R. and Naveed Kazmi, S. and Mekkaoui, T. (2017) Thermal management of water based SWCNTs enclosed in a partially heated trapezoidal cavity via FEM. International Journal of Heat and Mass Transfer, 112. pp. 972-982.

Ul Haq, R. and Soomro, F.A. and Hammouch, Z. and Ur Rehman, S. (2018) Heat exchange within the partially heated C-shape cavity filled with the water based SWCNTs. International Journal of Heat and Mass Transfer, 127. pp. 506-514.

Ul Haq, R. and Soomro, F.A. and Öztop, H.F. and Mekkaoui, T. (2019) Thermal management of water-based carbon nanotubes enclosed in a partially heated triangular cavity with heated cylindrical obstacle. International Journal of Heat and Mass Transfer, 131. pp. 724-736.

Z

Zakarya, D. and Farhaoui, L. and Hamidi, M. and Bouachrine, M. (2006) Structure-olfactive threshold relationships for pyrazine derivatives. Journal of Molecular Modeling, 12 (6). pp. 985-989.

Zana, R. and Benrraou, M. (2000) Interactions between polyanions and cationic surfactants with two unequal alkyl chains or of the dimeric type. Journal of Colloid and Interface Science, 226 (2). pp. 286-289.

Zarrouk, A. and Hammouti, B. and Lakhlifi, T. and Traisnel, M. and Vezin, H. and Bentiss, F. (2015) New 1H-pyrrole-2,5-dione derivatives as efficient organic inhibitors of carbon steel corrosion in hydrochloric acid medium: Electrochemical, XPS and DFT studies. Corrosion Science, 90. pp. 572-584.

Zennouhi, H. and Benomar, W. and Kousksou, T. and Msaad, A.A. and Allouhi, A. and Mahdaoui, M. and El Rhafiki, T. (2017) Effect of inclination angle on the melting process of phase change material. Case Studies in Thermal Engineering, 9. pp. 47-54.

Znini, M. and Majidi, L. and Bouyanzer, A. and Paolini, J. and Desjobert, J.-M. and Costa, J. and Hammouti, B. (2012) Essential oil of Salvia aucheri mesatlantica as a green inhibitor for the corrosion of steel in 0.5M H 2SO 4. Arabian Journal of Chemistry, 5 (4). pp. 467-474.

This list was generated on Thu Nov 26 13:06:59 2020 CET.